View Full Version : BMW CAS 3
wizz2c
21st September, 2016, 08:11 PM
Hi all, i need to change vin in cas3 from a used cas, i have a few programmers to hand, anyone got a pinout for the read of the processor?
many thanks
kizagt
21st September, 2016, 09:53 PM
Hi all, i need to change vin in cas3 from a used cas, i have a few programmers to hand, anyone got a pinout for the read of the processor?
many thanks
Give picture of Cas numbers
kiszka
21st September, 2016, 10:03 PM
.............
wizz2c
21st September, 2016, 10:11 PM
thanks buddy, i'll have to post pics tomorrow as i left work now
wizz2c
21st September, 2016, 10:14 PM
think it a 912
kiszka
21st September, 2016, 10:17 PM
...............
kizagt
21st September, 2016, 10:51 PM
Use this for Cas3 tested solution
399181
kiszka
22nd September, 2016, 12:16 AM
...............
wizz2c
23rd September, 2016, 10:48 PM
ok calling all brain boxes....
why is this happening, i have a used cas that i want to edit vin i have read ok with rosfar and edited the vin in two places, wrote back to cas,re read it and all seems ok, put on the car and found the vin had disappeared, re re-read again with rosfar but this time hard to read but once read there was no vin in file, tried everything what is going on, who can help me??
many thankshttp://www.mhhauto.com/images/skype/itwasntme.gif
PremierD
23rd September, 2016, 10:55 PM
Post your original file .. before you edited it ...
wizz2c
23rd September, 2016, 11:14 PM
heres both files
many thanks
wizz2c
24th September, 2016, 12:26 PM
if vin is a prob would it be poss to swap the isn to the original cas i have both old cas and new cas dumps, is this poss? please help:bawling:
wizz2c
24th September, 2016, 09:16 PM
Can anyone tell me if the Isn code from cas is only 4 digits as I have 3b 61. Does this seem right ?
MOHCIN2
25th September, 2016, 01:38 AM
firstble dont read it with xprog will damage your flash file
wizz2c
25th September, 2016, 11:44 AM
I read with rosfar, but I'm not sure if it's the full contents
dijo
25th September, 2016, 01:22 PM
m8 you need to read 4096 bytes, and be careful to not lost your data!!!
wizz2c
25th September, 2016, 02:19 PM
What would you suggest to read it with, and any tips on not to lose any data.
dijo
25th September, 2016, 03:35 PM
post picture from your connection and from cas...
we need to understand what is going wrong...
wizz2c
25th September, 2016, 05:42 PM
399806399807399808
all i need to do is either edit vin or change sk isn. i have all bins msv80, used cas, old cas
jakesman
25th September, 2016, 06:27 PM
on off topic
i read CAS3 with x-prog clone no problem i just make sure that " READ Verify" is Not selected i just read without verify and so far no problems
wizz2c
25th September, 2016, 07:02 PM
i dont have xprog just rosfar at the moment
dijo
25th September, 2016, 09:58 PM
m8 try to convert your file to bin format...
I dont have Rosfar, there for cant open correctly this format, only bin...
wizz2c
25th September, 2016, 11:07 PM
converted to bin all three files
PremierD
25th September, 2016, 11:18 PM
converted to bin all three files
Vin from original put into Used ..
wizz2c
26th September, 2016, 12:16 AM
many many thanks for all your help
wizz2c
26th September, 2016, 08:54 PM
yep,, i bricked the cas not actually sure how mind, i have another cas and i think a backup flash but when i load it to second cas nothing on car at all, can anyone check my file see if it looks ok?
wizz2c
27th September, 2016, 01:36 PM
SOLVED
i had back up flash and eep got a second hand cas and programmed the data, corrected chksum on file from pd for vin number, all well. thanks dk members for all your help.:champions:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.