PDA

View Full Version : Opel 1.9 CDTi EDC16C39 swirl flaps off



Fec001
28th September, 2016, 08:18 AM
Hi!
Enough just take swirl flaps out physically and switch off DTCs in ECU?

stanislav georgiev
28th September, 2016, 08:41 AM
You could try. It is possible to keep emergency mode. Can you attach a file

czerkam
29th September, 2016, 08:16 AM
Hi!
Enough just take swirl flaps out physically and switch off DTCs in ECU?


Also reset swirl hysteresis map from ECU.

Fec001
6th October, 2016, 03:33 PM
Here is the dump. Please switch off swirl flaps!

Thanks!!!!

Fec001
7th October, 2016, 07:41 AM
Dtc: P2075

stanislav georgiev
7th October, 2016, 12:03 PM
I think to be disabled valves you need a full file. Something like this

Fec001
10th October, 2016, 02:03 PM
Hi!
Here is a full BDM read about ECU

stanislav georgiev
11th October, 2016, 06:30 AM
Here try my decision

Fec001
1st July, 2022, 01:13 PM
Can I get help again with this please? I lost previous dump and forgot solution.
Vectra C EDC16C9 Z19DTH BDM read dump
0 281 013 409
SW 1037A50286
DTCs:
P1109-0F
P1109-61

atalayyildiz
1st July, 2022, 03:14 PM
Hi friend. Here is attached DTCs off.Please check..Checksum OK

stanislav georgiev
2nd July, 2022, 07:38 AM
Test my solution