View Full Version : uch n2 primastar corrupted file help please
scoot
29th September, 2016, 12:17 AM
Hi I have a 2004 primastar that welding was carried out on blowing the uch , I got a secondhand uch and swapped the eep but i think the file is corrupted as there is no immo light ,there was a light with the seconhand unit before I swapped the eep could someone please examine / repair file please and is it possible to read pincode from dump as i can virgin uch and then program virgin uch to the van thanks in advance scoot
lion0304
29th September, 2016, 01:00 AM
Hi I have a 2004 primastar that welding was carried out on blowing the uch , I got a secondhand uch and swapped the eep but i think the file is corrupted as there is no immo light ,there was a light with the seconhand unit before I swapped the eep could someone please examine / repair file please and is it possible to read pincode from dump as i can virgin uch and then program virgin uch to the van thanks in advance scoot
Your pincode: 1721FFAC2BE2
ISK: 80377A07F514
VIN: VSKF4BCB6UV159237
Usual immo light off Renault meaning no key store in immobilizer, try recode existing key.
No THANKS, no HELP!!!
Bllinda
29th September, 2016, 08:10 AM
Or try .... E0.2B.AD.FF.22.17
scoot
29th September, 2016, 08:26 AM
or try ? Bllinda I dont understand ?
tech111
29th September, 2016, 10:03 AM
the right pin code is
2B2217E1FFAC
what is the ECU type??
Bllinda
29th September, 2016, 10:09 AM
Look and you will find .... Try and report
or try ? Bllinda I dont understand ?
scoot
29th September, 2016, 10:44 AM
Bosch ecu 0 281 011 529
scoot
29th September, 2016, 12:52 PM
Codes are wrong anyone help please?
autochei
29th September, 2016, 03:17 PM
ump recognized: OK
Programmed keys: 2
ISK: 80 37 7A 07 F5 14
VIN: VSKF4BCB6UV159237
PIN: 2B2217E1FFAC
Bllinda
29th September, 2016, 03:54 PM
the right pin code is
2B2217E1FFAC
what is the ECU type??
This option is the last
ump recognized: OK
Programmed keys: 2
ISK: 80 37 7A 07 F5 14
VIN: VSKF4BCB6UV159237
PIN: 2B2217E1FFAC
tech111
29th September, 2016, 03:59 PM
Code I gave you is right ..
tech111
29th September, 2016, 04:00 PM
So put dump make new key I will make your ecu virgin
albertros
29th September, 2016, 08:01 PM
Hi,
no sure about your diagnostic. Check fuses check supply to uch.
doctore
29th September, 2016, 08:49 PM
Put another uch 2 and solved the problem because if light is not blink illuminated panel is interrupted put this dump in another Uch 2 ,the key remains the same:dago: trust me
If you help my post push a thanks button
scoot
30th September, 2016, 12:32 AM
many thanks everyone for your help i will try to code key in again tomorrow regards scoot
scoot
30th September, 2016, 06:47 PM
keys programmed van running tech 111 s codes were the correct codes thanks to everyone for your help regards scoot
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.