PDA

View Full Version : Multicar edc16 c39 0281012193 DTC 55F



Pyromaniak
30th September, 2016, 12:14 PM
Hi friends, ist here someone who can remove dtc 55F from this ecu? Ecu is EDC16 C39 motor iveco 3.0l like a daily.... This dtc cant be erase with diagnostic. This Dtc can be erased after 10000 motohours when dtc ist intermitent... ecu data ist similar like iveco, or fiat.

file contains flash and e2p

Many thanks!

edit: eobd code ist 0404

Pyromaniak
1st October, 2016, 09:49 AM
:dago: nobody can`t do it ?

bobolin4o
1st October, 2016, 10:00 AM
Here is the file, if you have limp mode, this will not solve the problem.
Regards!

Pyromaniak
1st October, 2016, 10:08 AM
Limp mode no, only a dtc. In our country must car every two years to control of emisions and they read a obd. I try it and report. Thank you.

Pyromaniak
1st October, 2016, 11:07 AM
error stil remains DTC ist intermittent and have code DTC 55F or eobd 0404 :stung:

bobolin4o
1st October, 2016, 11:15 AM
i have missed the second code block...

Babos
1st October, 2016, 11:18 AM
try now :)

Pyromaniak
1st October, 2016, 11:23 AM
I try it and report, many thanks for your time guys :)

waldi1979
1st October, 2016, 11:25 AM
Here you are.

Pyromaniak
1st October, 2016, 12:23 PM
Thanks to all you try it, but stil have same dtc :(

mihaiservice
1st October, 2016, 01:17 PM
Hi
this file its have two dtc table but only one P0404 in file !
i have disable all dtc related to egr but your multicar will go in limp mode very soon !

bobolin4o
1st October, 2016, 04:20 PM
Hi
this file its have two dtc table but only one P0404 in file !
i have disable all dtc related to egr but your multicar will go in limp mode very soon !


But it have 55F two times... so...
Regards!

mihaiservice
1st October, 2016, 05:12 PM
P0404 or 055F are at the same location (227) and only for one location in each maps

bobolin4o
1st October, 2016, 05:16 PM
Yes, that's right... but he tells, the DTC is still there... ~~~~!
BTW, Babos was made change at 226 position, may be Van Der Lube was not tested your and my second file...
Greetings from Bulgaria!

Babos
1st October, 2016, 05:28 PM
I not worry about that becaus i have big expierence with that. and can to say need good diagnostic for real dtc!!!! i see lot time you off dtc correct but dtc still be active!
And it is not mean you miss!! but some dtc cant to delete via that way.

pike
1st October, 2016, 05:31 PM
Yes, that's right... but he tells, the DTC is still there... ~~~~!
BTW, Babos was made change at 226 position, may be Van Der Lube was not tested your and my second file...
Greetings from Bulgaria!

Hi.
I think...

17DC5A - Specific; 17DEB8 -Fault Class


and one more time.

Pyromaniak
1st October, 2016, 07:06 PM
hi friends, problem solved. in flash is all ok, this car have problem in e2p data. I have wrong family in bdm and e2p have read only half file. Now i read complete and restore data with data from ducato file from this forum. Dtc can be erased and no faults remaining. Many thanks for your time. Sorry for my english.

mihaiservice
1st October, 2016, 07:58 PM
E2P isn`t store any dtc...nice try !

Pyromaniak
1st October, 2016, 08:20 PM
E2P isn`t store any dtc...nice try !
i restore half eprom from this file, in two half part of eeprom. with file from new read this dtc can t be erased. Try to compare, problem ist from 1000 line to end. I dont say, dtc ist in e2p, in e2p ist something what cant tolerate to diagnostic to do erase dtc...dtc have been intermittent, no limp mode, no ecu light, but cant erase..Best regards. Work with ori flash. Im not lier. Thanks :rofl: this car me 7 days making worry...

vlk69
10th June, 2019, 06:07 PM
There is one more sign of stored DTC 55F, no comunication possible over standart EOBD.

Pyromaniak Your file Full bdm read 27102015 ori_EEprom restore comunication over EOBD and there is no DTC 55F anymore.

Best regards