PDA

View Full Version : Peugeot 307 2006 EDC16C34 90PH to 110PH



arunas3000
6th October, 2016, 12:09 PM
Hi, in the Peugeot 307 1.6hdi 90PH i have changed the engine with a turbine to 1.6hdi 110PH, but not ECU( EDC16C34 ). Now it's works but management turbo is bad. With Galletto1260 I have read flash from this ECU( SW and HW is 1037375526 ) and have written other from EDC16C34 1.6hdi 110PH, but engine do not start. It starts again when I have written the orginal dump. How to solve this problem?

baltazar3
6th October, 2016, 01:08 PM
Hi, in the Peugeot 307 1.6hdi 90PH i have changed the engine with a turbine to 1.6hdi 110PH, but not ECU( EDC16C34 ). Now it's works but management turbo is bad. With Galletto1260 I have read flash from this ECU( SW and HW is 1037375526 ) and have written other from EDC16C34 1.6hdi 110PH, but engine do not start. It starts again when I have written the orginal dump. How to solve this problem?
You need full BDM from 110hp ECU.Write MCU and Flash in your ECU.
br

sonic 1989
6th October, 2016, 01:36 PM
Try REPORT

arunas3000
10th October, 2016, 06:18 AM
Try REPORT
Hi, nothing has changed, I think - because turbine management is different between 90PH and 110PH.
I will buy Galletto 4 FG Tech or BDM 100 and write MCU and Flash.

arunas3000
18th November, 2016, 09:16 PM
Hi. I have written this flash and eeproom. Now it working fine, but I have problem with DPF. Because the car does not have the filter. Maybe someone can do DPFf OFF. Thanks.

bodzio012
18th November, 2016, 10:10 PM
Your DPF OFF, pass PM

arunas3000
24th November, 2016, 12:47 PM
Hi, thank you for that. But now among other there are two faults :
P0473 Exhaust differential pressure sensor signal
P1435 Additive system
I think that due to the " Depolution system faulty" on the interior screen.
How it can be corrected?