PDA

View Full Version : Suzuki DL650 eeprom pinout 2015



kari11
7th October, 2016, 09:53 AM
Hello,

Could someone give eeprom wiring diagram?
Thanks
Kari

zckariya70
7th October, 2016, 10:24 AM
Here is the connections for u ........................402300

gueswhat
4th November, 2016, 11:07 AM
....................

gepakg
5th November, 2016, 10:16 AM
ohhh,after ducati,s1000rr now he want to play with dash of suzuki DL650 new dashboard but still not now which programmer to use for i2c

mate you have big balls also and your customers

best regards Gepa


hey with what for device u working with for km change?

cokolo
5th November, 2016, 10:20 AM
Remove LCD is much safer +30min job but no headache :)

auto_russia
5th November, 2016, 03:54 PM
i read his posts,and see that he wants to play with devil :-)

Alex


Remove LCD is much safer +30min job but no headache :)

lwood
5th November, 2016, 07:05 PM
what eeprom inside?

vova1970
16th August, 2018, 10:15 AM
What EEPROM inside?

frankrayk
16th August, 2018, 12:09 PM
What EEPROM inside?


93C66......

mariadumitruiul
8th January, 2022, 07:15 PM
Hi guys,

Would anybody help me please to change odometer from my 2015 Suzuki V-Strom from 52869 to ~ 22869 ?
EEPROM is 93C66

Thanks!

f2f2
9th January, 2022, 12:28 AM
Hi guys,

Would anybody help me please to change odometer from my 2015 Suzuki V-Strom from 52869 to ~ 22869 ?
EEPROM is 93C66

Thanks!

22869: change 64 byte

0x0100: 02 CF FD 30 02 CF FD 30 02 CF FD 30 02 CF FD 30
0x0110: 02 CF FD 30 02 CF FD 30 02 CF FD 30 02 CF FD 30
0x0120: 02 CF FD 30 02 CF FD 30 02 CF FD 30 02 C4 FD 3B
0x0130: 02 C4 FD 3B 02 C4 FD 3B 02 C4 FD 3B 02 C4 FD 3B

mariadumitruiul
10th January, 2022, 09:16 AM
Hi and thanks very much for this. Maybe could be too much, but is there any software that is doing this? Or tutorial to learn how to do it manually? Thanks a lot!

Makiszabi
23rd July, 2023, 06:08 PM
Here is the connections for u ........................402300
First of all, I would like to thank you for sharing this wiring diagram with us! However, I would also like to mention for those who want to read the EPROM based on this, that they should use a 5V to 3.3V level converter or set up the programmer for this voltage for reading and writing!