PDA

View Full Version : Astra H 2005 1.7CDTI, EGR and TVA off



Shmortz
11th October, 2016, 09:07 AM
Hello guys, I need proper solution for TVA and EGR off with disconected plugs on astra 17CDTI 80HP, I tested few solutions, the best of them is no check and car rev to 5000rpm but no turbo,
here is my ori dump read with MPPS (Galetto and Kess can't read that car).

DTC's with disconected TVA and EGR are:
P0400
P1400
P1125
P0638

stanislav georgiev
11th October, 2016, 09:48 AM
Hi I think you need a full BDM. There are several blocks histerzis the EGR :)

LaraVAG
11th October, 2016, 10:42 AM
Only BDM read, or Virtual read to write.

kinketotua
11th October, 2016, 01:27 PM
try these
--> 403004

Shmortz
11th October, 2016, 05:21 PM
Only BDM read, or Virtual read to write.

if I found full bdm read can I write with galetto or kess?


try these
--> 403004

Thanks, I will try tomorrow and report

Shmortz
13th October, 2016, 07:41 PM
not working, DTC are gone, but car is stil in limp mode

kinketotua
14th October, 2016, 06:10 AM
sorry Shmortz I dont have another solution to these...

soundnavigator
14th October, 2016, 06:46 AM
With ori you have turbo ( if no limp) ?

Shmortz
14th October, 2016, 06:59 AM
I don't have turbo with ori because tva is dead.
I tryed other solutions, with one of them I can rev to 5000rpm but still no turbo, turbo valve pwm is 95% before start, after start is allways 5% and bypass is open.

Sent from my LG-D855 using Tapatalk

mihaiservice
14th October, 2016, 09:41 AM
For such car you have to disable debouncing time from thorttle valve and egr ! dont need to be modified any tq limit !

Shmortz
16th October, 2016, 08:17 AM
Can you do that for me please

Sent from my LG-D855 using Tapatalk

draganelektricar
16th October, 2016, 02:06 PM
hi frend.
EGR plug disconnected
TVA plug disconnected
pass.pm

Shmortz
17th October, 2016, 07:28 AM
I will try and report, Thank you!

Shmortz
17th October, 2016, 03:31 PM
not working, car still in limp mode with no DTCs

filetuning
17th October, 2016, 04:16 PM
for 100 x 100 work read flash to bdm mode

Shmortz
17th October, 2016, 04:55 PM
Thank you, I will read it but car is far away now, will be here again next monday, car is running now temporary with other mod and disconnected vacuum pipe to turbo valve...

Shmortz
19th November, 2016, 09:26 AM
Hello guys, car is back to me again, I have full flash latest version for that ECU exctracted from tech2 card, I can write it with tech2 when modified, please someone to help with tested solution for TVA and EGR off

Shmortz
21st November, 2016, 10:51 AM
nobody can't do that?

konq100
21st November, 2016, 07:44 PM
Check this file bro

Shmortz
22nd November, 2016, 08:11 AM
thank you, I will try later and report!