Grand Vitara 2.5 2001 ecu immo synch

[dib47]

I sorted this myself in the end. I will help anyone with the same problem


Please can somebody check these files for me & correct if necessary. Customer ran battery flat then jump started. Then got immo light.
Faults in ecu p1623 & p1621, could get no communication with immobiliser. I believe something is fried in the immobiliser box & have got another. There seems to be alot of talk about problems with code sync between ecu & immo on these cars so please can someone tell me if the dumps are matched ok. I havent tried the new box, but as customer is far away i only want to go back once.

Immo 33970-65D01
ECU 33920-67DG

THANKS403606403607

[fadhle]

Ok mate load new dumps and start your car,regards.

[johnnyxl7]

fadhle

how can you sync ecu and immo with this files ?
i have the same problem with the same immo,
but because your file is pw I can not learn anything to solve my problem,
can you help please
thanks

[fadhle]

I sorted this myself in the end. I will help anyone with the same problem


Please can somebody check these files for me & correct if necessary. Customer ran battery flat then jump started. Then got immo light.
Faults in ecu p1623 & p1621, could get no communication with immobiliser. I believe something is fried in the immobiliser box & have got another. There seems to be alot of talk about problems with code sync between ecu & immo on these cars so please can someone tell me if the dumps are matched ok. I havent tried the new box, but as customer is far away i only want to go back once.

Immo 33970-65D01
ECU 33920-67DG

THANKS403606403607
No need thank at least confirm are the car start or no !!!!

[fadhle]

fadhle

how can you sync ecu and immo with this files ?
i have the same problem with the same immo,
but because your file is pw I can not learn anything to solve my problem,
can you help please
thanks
Post your files, i will help you,regards.

[johnnyxl7]

hello fadhle ,

here are my files, and can we switch to my thread http://www.digital-kaos.co.uk/forums/showthread.php/551337-IMMO-off-Suzuki-vitara-2-7l-2003

best regards

[fadhle]

Ok friend your immo dump x24c01 is not good ,read it under xior x24c01,then post here i will help you,regards.

[johnnyxl7]

hello fadhle,

i m read it again, xicor x24c01 , but same data or ? , mh, what is not good whit this dump ?

[fadhle]

hello fadhle,

i m read it again, xicor x24c01 , but same data or ? , mh, what is not good whit this dump ?


The same file not good,ok no matter please load my dump to your programmer then write to eeprom then read it again if the file not change
post your 4c tiris key data here i will add to dump and give you pair of files.

[johnnyxl7]

hello fadhle

file its after writing and reading changed to this here

thank you to help me

best regards from norway

[fadhle]

Friend what is the programmer you use it to read ans write.

[johnnyxl7]

i have for now only CH341A , i have eeproms soldered out of immo and ecu, its soldered now on this reader ,
my ezp2010 its on the way to me,
maybie 24c01 its broken , because i can not delete him,
on the 24c04 from ecu can i read delete and write ,
i can read and write on a 24c02 to, from a old usb-pci bord,
so i think 24c01 its broken,
must i have same 24c01 again or can take a 24c02 to this immo ?

[johnnyxl7]

i readed again x24c01 with my new ezp2010 and write your file, but nothing changed, i think this chip its broken, what can i do ?

best regards

[fadhle]

Ok that is good, now please read tiris format of 4c key and post here 7E -- --- --, I will add it and give you two files to start your car.regards.

[johnnyxl7]

ok, can i replace this x24c01 with atmel 24c02n ?

[johnnyxl7]

solved, thanks everybody

[tachoreparatur2]

hi i have Grand Vitara 2.5l ECU 33920-67DG 93C46 and immobox x24C01 data is bad here my key 04 B9 64 09 ,please help me car not start.Best THX

[MartiLer]

Damp??????

[tachoreparatur2]

I dont know how to put here the dump i can only video or photo but how to sent a .rar?

[johnnyxl7]

you need to read the eeprom and you can send .rar file ,

the best way for me was to go for emulator, because my immo eeprom was broken,

[alkiviadis]

the only you must do is to have one tool for immo in suzuki like tech 1 or tech 2 or gscan 2 and reprograme the keys

[xtianlix]

[QUOTE = fadhle; 2869604] Ok amigo, cargue nuevos volquetes y encienda su auto, saludos. [/ QUOTE]
Contraseñas?

[AMihaylov]

Hi can someony sync my Vitara 2.5 Ecu Hitachi 33921-67d6 Immo Mitsubishi 33970-65d01968924
(The file's may be damaged)
Transpoder 4c 00000000051EC8D$
Second key 00000000072035FE

[GNDTECH]

can someone please tell me if immo and ecm are in sync please

[MartiLer]

No sync....

[Bllinda]

https:/ /www.digital-kaos.co.uk/forums/showthread.php/1019852-Suzuky-Jimny-1-3-ecu-immo-sync?p=4566497&viewfull=1#post4566497


Hi can someony sync my Vitara 2.5 Ecu Hitachi 33921-67d6 Immo Mitsubishi 33970-65d01968924
(The file's may be damaged)
Transpoder 4c 00000000051EC8D$
Second key 00000000072035FE

[GNDTECH]

can you sync pls ?

[Sivao]

Plz password