Kess invalid protocol

[Madmikeyboi91]

Hey all so i recently purchased a kess v2 clone and seems to be working just fine alot of vehicles work, but i went to hook it up to my mazda yesterday and it came up with invalid protocol file so i went through the protocols and most work but i did come accross 2-3 just out of the maybe 50 insearched through that came up with this same message does anyone know why this happend if so how to rectify this problem. Thanks :)

[Fordprobe]

post a screenshot, and also your kess serial code

[Madmikeyboi91]

How do i add pictures :/

[PremierD]

Follow this link mate ....:)http://www.digital-kaos.co.uk/forums/showthread.php/508573-How-To-Upload-Files-To-Kaos

[Madmikeyboi91]

Maybe this works..
http://i1370.photobucket.com/albums/ag256/armymanmike91/Mobile%20Uploads/20161016_144922_zpsjasu8mmo.jpg (http://s1370.photobucket.com/user/armymanmike91/media/Mobile%20Uploads/20161016_144922_zpsjasu8mmo.jpg.html)

http://i1370.photobucket.com/albums/ag256/armymanmike91/Mobile%20Uploads/20161016_144942_zpsnhkmm8ib.jpg (http://s1370.photobucket.com/user/armymanmike91/media/Mobile%20Uploads/20161016_144942_zpsnhkmm8ib.jpg.html)

[Madmikeyboi91]

Any one any idea? I tried formatting the sd card and putting files back on but still no luck :(

[pulsar2000]

Any one any idea? I tried formatting the sd card and putting files back on but still no luck :(

Its your battery voltage mate 0v....
should be reading Higher, than 0v
must be a cable issue, not communicating as 0v

[Madmikeyboi91]

Haha its not plugged in bud when plugged into the car it reads 12.6 ish but still comes up with this exact screen

[gazvts]

Its your battery voltage mate 0v....
should be reading Higher, than 0v
must be a cable issue, not communicating as 0vdoesn't look like it's plugged to car as you say mate
but who ever he got kess clone from just copied instructions on updating the tool wrong .
this is exactly what i was on about on another thread
i would try new sdcard & do not copy over any sdcard files only use the update files run ksuite 2.08 maybe it will solve the problem

[Madmikeyboi91]

No it wasnt plugged in but does the same when plugged in. Where can i get a new sd car from? Update files :/ thanks

[gazvts]

just buy new micro sd 2gb put it straight in the kess & search forum for the update folder that matches your serial look for ksuite v2.08 internet safe

[Madmikeyboi91]

Ahh i see i have a few spare sd cards about i can use or does it need to be new.awesome thank you buddy

[Madmikeyboi91]

http://www.digital-kaos.co.uk/forums/showthread.php/551676-Kess-v2-4-036-K09021102-Reset-Token-Free-Solution-!?highlight=card+update


Would this be what your talking about doin?

[Madmikeyboi91]

https://eobd21.wordpress.com/2016/07/21/kess-v2-fw4-036-invalid-protocol-file/

Or this ? :/

[pulsar2000]

Haha its not plugged in bud when plugged into the car it reads 12.6 ish but still comes up with this exact screen

Mate you need a working car with fuel in and a good working battery ! Then try, will work,,,


HAHA, PUlling your leg :burnout:, mines always ok, and read this ecu before no issues, so prob sd card as GAZ . Others say,,,

[Madmikeyboi91]

Haha all sorted now people thanks for the help much appreciated. All working perfectly :)

[smirnoff_rules]

tell member's what you did m8 ,, it helps others

[pulsar2000]

tell member's what you did m8 ,, it helps others

Yes all about sharing knowledge, assuming was the sd card Files Yes ?

[Madmikeyboi91]

So basicly what i did was installed version 2.08 then took the sd card out and formatted it to fat32. I then put sd card back into kess clicked on kess protocol update loader then kess protocols update start it done some magic and it worked. Cant really explain much more as im not 100% on it but this solved my ivalid protocol problem :D

[Grucha1982]

Hi
Easy and fast. Helps me much. U R the best