Mercedes B180 W246 Mileage

[paskuale]

Hello mates,
I need to correct mileage on Mercedes B180 CDI year 2012 W246.
Car is manual transmission, so it have ESL.
I resetted successfully EIS with DiagSpeed.
Correct successfully cluster on the bench, eeprom 95640.
When I put cluster on the car mileage jump back after some time.
I correct a lot of W176/W246 but always automatic transmission, so without ESL.
I know on these cars only EIS and Cluster holds mileage.
Someone knows more ?
Thank you
Bests

[rola1971]

Hello mates,
I need to correct mileage on Mercedes B180 CDI year 2012 W246.
Car is manual transmission, so it have ESL.
I resetted successfully EIS with DiagSpeed.
Correct successfully cluster on the bench, eeprom 95640.
When I put cluster on the car mileage jump back after some time.
I correct a lot of W176/W246 but always automatic transmission, so without ESL.
I know on these cars only EIS and Cluster holds mileage.
Someone knows more ?
Thank you
Bests

you need put can blocker
good luck

[paskuale]

Mate I don't Use can blocker, I reset mileage in EIS without needed of Can blocker.

[vageric]

Hello mates,
I need to correct mileage on Mercedes B180 CDI year 2012 W246.
Car is manual transmission, so it have ESL.
I resetted successfully EIS with DiagSpeed.
Correct successfully cluster on the bench, eeprom 95640.
When I put cluster on the car mileage jump back after some time.
I correct a lot of W176/W246 but always automatic transmission, so without ESL.
I know on these cars only EIS and Cluster holds mileage.
Someone knows more ?
Thank you
Bests


keep thinking only cluster and EIS hold mileage :)

[paskuale]

Mate are you sure ?
I resetted EIS, it showed 0 KM in diagnose...
And cluster was corrected, because for 10-15 seconds it showed corrected mileage...
After old mileage jump back.
I always corrected Cluster and reset EIS on W176 and W246 automatic transmission, these does not have ELV...

[vageric]

mileage is also in dpf, engine ecu, service just to mention a few.

[vageric]

Mate are you sure ?
I resetted EIS, it showed 0 KM in diagnose...
And cluster was corrected, because for 10-15 seconds it showed corrected mileage...
After old mileage jump back.
I always corrected Cluster and reset EIS on W176 and W246 automatic transmission, these does not have ELV...

if it jump back is because the algo in ezs is not correct prob.

[paskuale]

Mate the problem is not EIS and not cluster.
I think ELV has mileage inside.
Old mileage jump only when I make ignition ON.

[zlukic]

sorry mistake....http://www.digital-kaos.co.uk/forums/showthread.php/551707-Upa-usb-reading-tms370

[paskuale]

What I have to do with UPA hardware test ???

[Mario3]

ESL has mileage too, thats your problem. Can you reset esl also with diagspeed ?

[paskuale]

No, DiagSpeed does not reset this ESL new type (5 pin).
So it's sure that my problem is ESL ?
It seems to be strange that jump only with ignition ON, on W204 it jumps with cluster connected. No matter about ignition...
Assyst and Assyst Plus can't be the problem ?
I discover that car has a lot of service in the assyst memory...

[benzstop]

The problem is definitely ESL, sends it bi lin bus

[lupu_sandu]

Also on W204 mileage can jump back from ESL.

[technobox]

i have to same problem i put canfilter same km jump

Sent from my SM-N920C using Tapatalk

[paskuale]

Where did you put can filter ?

[pierre renault]

Yes ESL has Km