PDA

View Full Version : VW UP! ME17.5.20 Bootmode need help



kmd
19th October, 2016, 07:00 PM
i have here vw up 2013 with me17.5.20 motronic ecu
i trye in bootmode to read with ktag but no work an i trye with galletto with TPROT menu it can indentify but not can unlock

any idee how to read and write?

GabrielMga
19th October, 2016, 08:00 PM
Hi friend,
Maybe your energy source was poor when you tried bootmode.
I did some without problems.

voltechcar
19th October, 2016, 08:07 PM
what k-tag? clone ??

kmd
19th October, 2016, 08:46 PM
ktag clone 6070,2.11 , but work ok on other edc17 and med17 also with tprot

and i have good power source

i test also with mpps v18 it can only read the eeprom and not the flash or bypass the tprot

voltechcar
19th October, 2016, 09:19 PM
maybe ecu have upgrade update to aso and clone dont have pass

speedy100
24th February, 2018, 11:21 PM
i have here vw up 2013 with me17.5.20 motronic ecu
i trye in bootmode to read with ktag but no work an i trye with galletto with TPROT menu it can indentify but not can unlock

any idee how to read and write?

Hi there,
Can You post pinout for FG Galetto and ME17.5.20 please?
Best Regards

vinsk8
26th February, 2018, 03:08 AM
ktag clone 6070,2.11 , but work ok on other edc17 and med17 also with tprot

and i have good power source

i test also with mpps v18 it can only read the eeprom and not the flash or bypass the tprot

Only Ktag 7.020 can make this ecu, or KTM100
I donīt use but i think galleto can make also