PDA

View Full Version : Vw EDC16U1 -Programming mode ?



jakesman
19th October, 2016, 07:48 PM
Bosch Hardware Number: 0281011786
Vw Software Number: 03G906016EH 7214
System Type Number: R4 2,0L EDC G000SG
Flash Attempts: 1 Times
Flash Programmed Ok: 1 Times
Ecu running in normal mode
Ecu Found on KLine
edc16u1
so a dude comes to me and ask to flash a file on his ecu , where he got it i do not know but as always read and make a backup of the original , all done write the file to his ecu with mpps and after that when i ID the ecu it say " ECU in Programming mode"
so why is this , write original back and all good again i told him that i can not promise it will work , but he insisted so now he is missing a couple of $$$$ for the flash and recovery
any answer or reason for this i would like to know is it because of the dif software version?
i post original and "mod file"
Original file :
ECU: 0281 011 786
Software : 1037 37 5893

Modfile :
Ecu :0281 011 786
Software : 1037 36 9816
404823

baltazar3
19th October, 2016, 08:01 PM
Bosch Hardware Number: 0281011786
Vw Software Number: 03G906016EH 7214
System Type Number: R4 2,0L EDC G000SG
Flash Attempts: 1 Times
Flash Programmed Ok: 1 Times
Ecu running in normal mode
Ecu Found on KLine
edc16u1
so a dude comes to me and ask to flash a file on his ecu , where he got it i do not know but as always read and make a backup of the original , all done write the file to his ecu with mpps and after that when i ID the ecu it say " ECU in Programming mode"
so why is this , write original back and all good again i told him that i can not promise it will work , but he insisted so now he is missing a couple of $$$$ for the flash and recovery
any answer or reason for this i would like to know is it because of the dif software version?
i post original and "mod file"
Original file :
ECU: 0281 011 786
Software : 1037 37 5893

Modfile :
Ecu :0281 011 786
Software : 1037 36 9816
404823
You cant vrite different sw version via OBD

jakesman
19th October, 2016, 08:11 PM
so best solution here would be if some one could make me a good tune with EGR off ?because his egr is blocked off , i do not even know what is in the mod file and if it would even have been safe for the car

baltazar3
19th October, 2016, 08:30 PM
so best solution here would be if some one could make me a good tune with EGR off ?because his egr is blocked off , i do not even know what is in the mod file and if it would even have been safe for the car
Take a look what OLS says

smirnoff_rules
19th October, 2016, 08:37 PM
all l want to say is your mad to flash a car with a customers flash anyway ,, customers lie they cant help it

baltazar3
19th October, 2016, 08:41 PM
.... and MPPS in not safer tool for try-to-see work...

daniel guerra
19th October, 2016, 11:01 PM
But MPPS should be able to recover this ECU right? At least the original file

smirnoff_rules
19th October, 2016, 11:07 PM
l have mpps 16v and never use it on odb its just to cheap to be safe and software is to buggy , only used to recover edc15 on the table , unless yours isnt a clone

jakesman
20th October, 2016, 07:26 PM
thanx for all of you for the input , and no it is clone mppsv16 and my galleto got damaged with a faulty ecu i only got it for edc15 , this is only second time i use it on edc16 and yes i had original file dump before i wrote crap to ecu , i am NOT a tuner that i give credit to the tuners they work hard and long to earn a living trail and error we need them , i just use the flash tools for some stuff so why i did it was because the dude insisted and i told him that i do not want to but he wanted it so he got it , " if ecu is bricked your problem if ur engine is busted your problem , his response JUST FLASH IT mate " so i did but from experiance if u want mod file the best is to read original and get a good mod from the same file , so i gues next he will ask me if can get a mod with egr disabled because his egr is blocked off and wants more power this mod file looks like a e-bay special