W203 2nd Hand Dash "-----" Professional Help Request to sync with EZS

[divagomania]

Hello

I have read every post about W203 Dash change.

I have received a car with dash problem "-------"

So I read EZS and got original mileage and SSID (with SKC-MEHACO): 230041,6 km and SSID: E0 E6 02 EB

On dash none of these solutions worked:
I have put Dash to same mileage - Failed (I noticed diferent SSID)
Changed on dash bytes from 0x036 to 0x039 to same EZS SSID (with help of DK forum user) - Failed
Tried reverse SSID on dash - Failed

Tried FFFFFF to mileage location on dash (0x000 to 0x01F) making it virgin I believe - Failed
Tried FFFFFF and same SSID and got two Clone Star Diagnostics from Mechanics to try to sync dash with EZS - and both gave 8.600.0 error (something about communication failure) I read someplace that maybe Star is badly instaled ????

I HERE REQUEST FOR PROFESSIONAL HELP - TO PAY!
Can someone sync manually 2nd hand Dash with EZS?

I live in a small island and cannot get Original Star or Abrites to sync dash with EZS!
This is my first time I came across W203 Dash problem so I tried evry thing I read in the forum. But cannot understand why both Star give Communication failure when I try to sync dash with EZS.

TAHNK YOU ALL for any help
404861

[Mario3]

Your problem is that the dash eeprom has on 2 positions the mileage stored. To adapt it you need to edit both places. Im talking about:

0000-00FF

and here too:

0300-031F

Put it to 0km both and adaptation with star should be no problem

regards

[divagomania]

Thank you for your fast reply. And correct observation, but ...

Sorry I did not writed correctly on the first post. I did that, that is, I have made 0x000 to 0x0FF and 0x300 to 0x31F to FF FF = 0 km
But it also failed.
Star diagnostic (clone) always gives Communication failure (Error 8.600.0) when I try to sync with EZS, other than that I can change most of the dash parameters.

[volismb]

This happens when the dash is "flashed". Send the ssid of the eis and upload the dash dump to check it

[divagomania]

This happens when the dash is "flashed". Send the ssid of the eis and upload the dash dump to check it

Did not understood the meaning of being "flashed"
The dash is 2nd hand that was working on other car. Please find the dash eeprom dump (93C86) is in the first post.
Do you mean you need the dash processor flash?

The ezs eeprom dump is also in the first post and using the SKC-MEHACO software it gives that the CAR original SSID is: E0 E6 02 EB

I already tryed to put this value in dash at 0x036 and same mileage as EZS but failed.

Thank you for your time

[baze007]

Did not understood the meaning of being "flashed"
The dash is 2nd hand that was working on other car. Please find the dash eeprom dump (93C86) is in the first post.
Do you mean you need the dash processor flash?

The ezs eeprom dump is also in the first post and using the SKC-MEHACO software it gives that the CAR original SSID is: E0 E6 02 EB

I already tryed to put this value in dash at 0x036 and same mileage as EZS but failed.

Thank you for your time



I think your problem is in your file .... I think it is damaged or other car drive ezs with m908 inside....your file for ezs is m9s12
File says that your dashboard has 203540 71 11 part number and drive ezs with 908


Here are 3 files corresponding to 203540 13 11 you have first to try and have all 230,016 kilometers and eis file I did at 230,016 km

​Maybe all this is that I'm wrong ..... but it's worth to try

P.S
Other two files drive 9s12 ezs

[vageric]

This happens when the dash is "flashed". Send the ssid of the eis and upload the dash dump to check it


not possible when dash is flashed.
becuase if it's flashed it then break the sync with the ezs.

[vageric]

i think the easy'st way to solve this problem is to flash the dash.
if you have the tools to flash the dash then do it and it wil break the sync with the EZS and your done!

[kachimbi]

try this in the dash

[kachimbi]

which other tool do you have? do you have any to do mileage?

[divagomania]

Thank you for your information: baze007

Your idea of compatibility problems makes sense, but a person from WSCTOOLS confirmed that 203540 71 11 should be compatible with both HC908 and the car original EZS 9S12

I have noticed that your files did not seem to have the correct SSID, should it work without the correct SSID?

I took so long time without solutions that I delivered the car back to the owner but will try to have it back by the end of the week.

[divagomania]

Thank you Vageric and Kachimbi,
All I can get borrowed is two clones of Star diagnostic. (Original Texa Diagnostic, Carprog, Smok JTAG) I do not know how to flash with Star clone.
About breaking the sync between Dash and EZS, Smok and DIGI say that they do not have solution for these units ( Sync blockage of mileage) only for later models.

[deondti]

Hi there

Could someone please assist me by changing the mileage to 50KM
in order for me to reinstate drive authorization.

W203
93c86 16bit attached

I thank you in advance

[vageric]

Hi there

Could someone please assist me by changing the mileage to 50KM
in order for me to reinstate drive authorization.

W203
93c86 16bit attached

I thank you in advance

try this and report

[deondti]

no good
5732KM

[deondti]

please help

[Leburns]

please help

here is your dump 100% correct

[vageric]

what is original mileage from your dump?

[deondti]

could someone please help me change the mileage to 0KM , thank you in advance

[clusters]

Here you go....

[ATRON]

I have a car with dash problem "-------".All dashboard work fine ,but after flash km go to ------- lines.

I try restart dash,writte 0 kms and not work.

Can someone help me???

MB W203 diesel Automatic C220 cdi
DC 203 540 56 48 QD2
Made in 13.10.06
A2C53091836

[ATRON]

Here dumps EZS ,please ,search SSID and writte in eeprom dash to swap problem.

[baygrozdan]

SSID:B8585B04
Already in attached file from you. Try this file and report back

[ATRON]

Need pass ,please

[baygrozdan]

check your pm..

[ATRON]

MB Vito 2010 dash+EZS
We need Swap dash ,original EZS dump and Dashboard second hand eeprom show mileages "--------" .
Ssid in EZS 18 DA 01 C7 need adapt Dash .
Mileage 152000 needed
BR