Need help with VVDI2 BMW OBD Functions

[BRMTDI]

I recently paid for BMW auth for my device....

Can not read the two cars I tried so far through OBD....

2003 BMW 325 and 2006 BMW 335i....

I am curious if anyone has same device if there is something else you guys do the get the device to read.

I recently ordered there CAS cable....just to see if I can read BMW in maybe a different way so I can make keys.

I ordered AK90 as a backup but would really just like the VVDI2 BMW OBD Auth to work.

[alkaskad]

I'm not familiar with vvdi, but i think you need read cas with programmer like xprog or r270...but i did cas via obd with digimaster2, i needed to disconnect instrument cluster for reseting... The 2003 325 is e46 and i think it have EWS unit,not CAS...you can do it with xprog.

[qwojtus]

I recently paid for BMW auth for my device....

Can not read the two cars I tried so far through OBD....

2003 BMW 325 and 2006 BMW 335i....

I am curious if anyone has same device if there is something else you guys do the get the device to read.

I recently ordered there CAS cable....just to see if I can read BMW in maybe a different way so I can make keys.

I ordered AK90 as a backup but would really just like the VVDI2 BMW OBD Auth to work.

What fault does it come up when trying connect?

[BRMTDI]

For the E46 just says no communication, I ordered there EWS/CAS Plus...that connects directly to the module see if I get better communication on E46 after that.

I also ordered AK90 as a backup to make keys for EWS cars.

I played with the system on a E90 today..I could read the CAS3+ system through OBD...but I had to press connect over and over again...until it finnaly read which makes me think something is interrupting communication.

My friend has JB4, Burger Tuning Kit...which is like a tuning box...he went to the settings to disable the system but I wonder if that unit is interrupting communication even when it is off.

Using ISTA...have no issues talking to the car...but no idea if CAS3+ is more sensitive.

[daxxer]

I recently paid for BMW auth for my device....
Can not read the two cars I tried so far through OBD....
2003 BMW 325 and 2006 BMW 335i....
I am curious if anyone has same device if there is something else you guys do the get the device to read.
I recently ordered there CAS cable....just to see if I can read BMW in maybe a different way so I can make keys.
I ordered AK90 as a backup but would really just like the VVDI2 BMW OBD Auth to work.

use VVDI2 main thread here: http://www.digital-kaos.co.uk/forums/showthread.php/482518-VVDI-2-new-tool-arrived :listen:
there are all info, updates, problems, issues and help with factory support about this tool ;)

[BRMTDI]

Yeah moved my post there....thank you...

I see Samic is right in the thread...eventually VVDI2 will get better and better I am sure...

They just need to fix bugs.

[Galee]

You have PM[emoji106]


Sent from my iPhone using Tapatalk

[BRMTDI]

I PM'd you back Galee, it said your storage was full so would not allow.

So EWS must always be removed...E46 not possible through OBD...I thought I could at least recode E46 modules through OBD or K line...guess not..

I ordered CAS Cable from xhorse made for VVDI2, I assume maybe PINS are already correct on this unit...

I guess when it comes in I can try....

I saw with AK90 took EWS has to be removed...but VVDI2 has nicer interface probably better to do everything on that unit from now on.

[Galee]

Should. Be clear now[emoji106]


Sent from my iPhone using Tapatalk