crash nissan NV200

[gpmoto2]

Hey friends please clear Airbag Nissan NV200
285563LS1E
eeprom 93C56
Thank you for your help!

[kiriki6969]

Test and report friend..........:wink:

[smc14c]

Hi,

Clear attached.

[eeddyy23]

first will no work just clear ffs after a55a dont erase a55a it will work

[Tubarrete]

Hi guys, i've tryed to clear mine, but when i programed it, the unit was not recognized,

Somebody can watch my files?

Thanks in advance

413104

[FxShaw]

File is all messed up that is why.

[Tubarrete]

File is all messed up that is why.

413192

This is the only change that i've made, why do you say that the file is messed up?

[credoline]

Because file is messed up from beginning. You are make problem with file. Too little knowledge you have. :apologetic:

[Tubarrete]

Hi, seems that problem was the original read was corrupted, i tryed to write back (Crashed file) and the unit its still not recognized.

I cleared the original file of GPMOTO2, and the unit is recognized with 0 DTCs, but the dash lamp its still on.

Somebody have a virgin or clear file for this unit?

Thanks

[credoline]

Good file or virgin will not help you. You are still make mistake, the same mistake as from beginning. Original file has NOT be corrupted !!! You are make file to be corrupted, understand ?

[Tubarrete]

Good file or virgin will not help you. You are still make mistake, the same mistake as from beginning. Original file has NOT be corrupted !!! You are make file to be corrupted, understand ?

Really I don't understand, I've two units, with different reference, 28556JX00E (with two front airbags) and 285563LS1E (only one front airbag).
I readed both with carprog, when i rewrited the same bin file that i've readed, without making any change only the 285563LS1E is not recognized, and I think that the problem was bad reading / bad contact with the dip clip adapter.


I writed the file in the first post to 285563LS1E and the unit is now recognized, and later I erased the crash (i'm beginner, but i've erased other units) and the unit don't show any error and it's recognized, but the light still on in the dash,
i'm asking for the file because i'm not sure if there is any problem with the file or it's incorrect erased.


PD:If really it's messed up, i don't know why, because i readed both with the same tool, carprog. and one it's ok and other no.


Thanks!