PDA

View Full Version : Peugeot 207 dpf off



sida
1st November, 2016, 01:00 PM
Please I need DPF OFF with peugeot 207 1.6 hdi. Thanks
407365

Act Tuning
1st November, 2016, 01:20 PM
Dpf Removed,

sida
1st November, 2016, 01:25 PM
Big thanks

sida
1st November, 2016, 01:52 PM
Act Tuning, the car is stil in limp mode, max 3000 rpm and dpf error :(

Act Tuning
1st November, 2016, 02:17 PM
Edc16c34, what fault to you get on the ecu ?? and send me 8 last vin number

sida
1st November, 2016, 02:23 PM
I dont have lexia, with autocom can not read fault code of ecu, I have display warning antipolution error if that can help...

Act Tuning
1st November, 2016, 02:31 PM
try to read with Eobd mode, without choose type of car,

Babos
1st November, 2016, 02:32 PM
something is wrong in 1.6 if all is correct to do car must up 3000 with dtc active!

sida
1st November, 2016, 02:38 PM
Act Tuning is this solution 100% OK, or has to be done something else on car? Dpf is mechanical removed before your solution.

Act Tuning
1st November, 2016, 02:44 PM
Hi
100% work solution, but we need to know what is the fault in the car, try this file of Swiftec also working solutio, if now tomorrow i will make you manuall solution as today i out of the office,

Act Tuning
1st November, 2016, 02:47 PM
with what tool you write file, as i didnt checksum your file, mybe ck problem, let me know , this is test files, and also swiftec and its easy ecu, so update me,

sida
1st November, 2016, 02:53 PM
I write file with MPPS, the manual solution is what I wonted, I have also volta, ecusafe.., but didnt wont to try I was think that is not good solution. Thank you for your time, I will try second solution and keep you update with possible fault code in ECU. Thanks

sida
1st November, 2016, 02:58 PM
I will try second solution and do chechsum in winols. Thanks

Act Tuning
1st November, 2016, 02:59 PM
Its Swiftec solution for this, no volta here or other crack software, please update me with 2nd file and faults,

sida
1st November, 2016, 03:16 PM
With second file same.. I will post fault code soon.Thank you Act

sida
1st November, 2016, 05:37 PM
Act Tuning, is it posiible that EGR is not working and car is in limp mode because of that? I checked now and there is no any DTC regarding DPF, also there is no antipolution filter error warning on display. U had only these fault codes, P2126, P1351, P1403, P1404 and when I deleted them they are disappeared and UCU doesnt have any fault code now. Can this be EGR problem and can you help me with that? Thanks

Babos
1st November, 2016, 05:39 PM
Act Tuning, is it posiible that EGR is not working and car is in limp mode because of that? I checked now and there is no any DTC regarding DPF, also there is no antipolution filter error warning on display. U had only these fault codes, P2126, P1351, P1403, P1404 and when I deleted them they are disappeared and UCU doesnt have any fault code now. Can this be EGR problem and can you help me with that? Thanks


Share dtc description

Act Tuning
1st November, 2016, 05:53 PM
Send me vin number to check this faults,

but look like this is your problem 3000rpm :

P2162 - Throttle/Pedal Position Sensor/Switch "E" Circuit Range/Performance

sida
1st November, 2016, 06:33 PM
None of these fault codes are not related to this kind of problem. Before I deleted them, I took a picture where you can not see description, but when I read description it is fault code for some glow plug... Now car doesnt have any fault code in ECU but still can not go over 3000. P2162 is fault code regarding programming (flashing ecu) but is just temporary and most common fault code when you flash some ecu..

Act Tuning
1st November, 2016, 06:39 PM
you need to check with good diagnostic cause in this car no DPF or Egr limit the rev to 3000rpm, so you need to deep diagnostic the faults you have there, you dont have access to lexia/pps ??

sida
1st November, 2016, 06:49 PM
Will have tomorow, only what I recognized in meassure block what is not normal was egr is not moving in % open/close and turbo pressure is not good, actual pressure not follow what ECU wonted. When I press a pedal Ecu wont 1500 but actual stay on 1000mbar for example

Act Tuning
1st November, 2016, 06:59 PM
I sure when you connect pps/lexia you will see dtc related to your problem, that autocom wont show you, if you will need assist with pps/lexia with tv tell me,

sida
1st November, 2016, 07:10 PM
OK, thank for your time

sida
2nd November, 2016, 08:44 PM
Update..
Car has no any dtc, read with lexia. In parameters I could see big difference between required and actual pressure. I think that egr is stuck open, mechanical will check mechanic parts. I will post result when I get this job done.

kinketotua
3rd November, 2016, 06:18 AM
Hi. if you want try these
--> 407681

sida
3rd November, 2016, 02:16 PM
Solved.
Problem was in EGR, mechanical part stuck in open position. Thank you all