PDA

View Full Version : galletto 2 bdm pinout EDC15C39



midnightman1
4th November, 2016, 11:26 PM
Anybody have pinout for galletto and EDC16 BDM??

I am trying to read ecu...still get error in galletto SW. maybe chiness adapters? I tried to connect it manually from google pinout for BDM galleto but still get error.

I used this pinout:

http://img2.uploadhouse.com/fileuploads/16784/167842169fe15ac32e01653c5823db7029c63d9c.jpg

GND, 12V, 12V ign connected from external sources . (GND not connected to galletto) only to external source.

I tried it without adapters...directly...no result.

tanks

TWINGO
4th November, 2016, 11:31 PM
Edc15c39 ???
Are you sure?
Bdm is not possible for edc15...

smirnoff_rules
4th November, 2016, 11:52 PM
l have 2 fgtech eu clones and they are crap on bdm , work fine on edc17 and pcr2.1 but not well bdm ! l hate the the way you have to power it too ,very easy for noobs to place wrong with power on and burn ecu , bdm100 or ktag never fail

saying that got me out of trouble on a volvo edc16 worked over kline

TWINGO
4th November, 2016, 11:57 PM
I've galletto2 and galletto4. They work good...

midnightman1
5th November, 2016, 12:49 AM
So my question is..what with GND... Connect it to galleto pin 5 or to external power supply as ground for 12V and 12V IGN? Because there is only 1 ground on BDM pads... But I need 2 ground points :D one for galletto data reading and one for supply.

thanks!

TWINGO
5th November, 2016, 04:20 AM
this link can help you:
http://blog.obd365.com/2014/08/15/if-bdm-not-work-fgtech-galletto-v54/

midnightman1
5th November, 2016, 11:41 AM
I know this adapters..but anybody know direct connection wiring? Where to connect ground?

bobolin4o
5th November, 2016, 01:45 PM
...l hate the the way you have to power it too ,very easy for noobs to place wrong with power on and burn ecu...

The noobs must do not play with those stuffs, they have right to pay someone, who is not a noob...
Cheers!

bobolin4o
5th November, 2016, 01:53 PM
I know this adapters..but anybody know direct connection wiring? Where to connect ground?

Dude, do not search for a calf under the ox...
Use the schematics and adapters and all will be fine!
BTW... the ground is called ground, because is like the earth ground... everyone stays on it...
Is it clear now?

midnightman1
5th November, 2016, 02:02 PM
Everyone is a noob at the begining.......or someone born as chipmaster? .....I hate this words about noobs and etc....

Yes but sorry my english :) probably misunderstanding. Now I have answer..ground on pin 3 and 5 galletto must be connected to ground on BDM pads + this ground is same for external power supply so paralell connection. This was my answer.

About chiness adapters...yes you can use them :D If you have some spare ECU, because my adapters which comes with galleto have faulty wiring...!!!!!!

bobolin4o
7th November, 2016, 10:19 AM
Post a high resolution pictures (both sides) of your faulty BDM adapter for Bosch ECUs, so we can see with our eyes.
Regards!