PDA

View Full Version : sprinter 2.7 speed limiter



wflseba
9th November, 2016, 01:39 PM
hi, can somebody remove speed limiter from eeprom 5p08
sprinter 2005 2.7 cdi
160ps
ecu edc15 cd2
0281011752
i now is easy with star but i dont have it
thanks for help

wflseba
9th November, 2016, 10:01 PM
swiftec can remove limiter

BOSCH EDC15C6 (EEPROM)

https://www.vcpowerteam.com/products/swiftec-speed-limiter-removal-module/

someone can share solution
thx

mercis
10th November, 2016, 04:12 AM
star diagnosis obd,easy

bobolin4o
10th November, 2016, 07:06 AM
hi, can somebody remove speed limiter from eeprom 5p08
sprinter 2005 2.7 cdi
160ps
ecu edc15 cd2
0281011752
i now is easy with star but i dont have it
thanks for help

How much is the speed limit now?

wflseba
10th November, 2016, 08:15 AM
need remove total or set 140-160 km/h

bobolin4o
10th November, 2016, 08:24 AM
I will ask you again... how much is the speed limit now?

90, 100...???

wflseba
10th November, 2016, 08:55 AM
now is 88km/h

bobolin4o
10th November, 2016, 11:45 AM
Test this...
Regards!

wflseba
10th November, 2016, 01:04 PM
Now the limit is 40km/h

bobolin4o
10th November, 2016, 01:20 PM
Now the limit is 40km/h
Read the eeprom again and post the dump here.

wflseba
10th November, 2016, 01:31 PM
eeprom after 40km/h

bobolin4o
10th November, 2016, 02:38 PM
How you read the real speed of the vehicle... with diag scanner from the ECU, or with your eyes from the tacho?
In the ori dump i think the speed limiter is 89km, in the seccond - 35km.
Any way... now i'm wait one friend to make the speed limit remove with Swiftec...
Be patient...

wflseba
10th November, 2016, 03:09 PM
SOLVED write file from another ecu
address from 1d0 to 1d4 change to 02 02 00 ff ff(virgin)
I do not know what the speed limit is now but was driving 140 km / h:)
i think solution is good
any way thanks friend
attachments file to compare

bobolin4o
10th November, 2016, 03:15 PM
161 in this file...
So i was on the right way, but obviously there is and checksum, which i don't know how to do...
BTW, i hope, that the codings of the ECU are the same, but... without the STAR, you never will know.
You must to have this tool, mate!!!
Regards!