PDA

View Full Version : BMW 3 Series 320d DDE 7 EDC17 Stock map and settings



henal
13th November, 2016, 04:35 AM
Hi,

First time i read Tricore ECU,

I need Stock/Original Settings on this ECU,

Car has been Remapped before,

car details is;
bmw 320d 2007 N47d20a
full exhaust,


ECU details is;
Bosch 0281013536
DDE 7 807 827
Infineon Tricore SAK-TC1766-192F80HL


Tool for Read FGtech v54 Chinese Clone

can pay for your time !409649

Act Tuning
13th November, 2016, 10:10 AM
Here is Stock

henal
13th November, 2016, 12:33 PM
Here is Stock


Hi Act Tuning,

is this my file modified ?,

does the eeprom file not need modifications ?

Act Tuning
13th November, 2016, 03:16 PM
I dont know didnt check, you ask for stock and you said the car was remaped, so...

henal
13th November, 2016, 07:18 PM
I dont know didnt check, you ask for stock and you said the car was remaped, so...


File fails due to OTP,

if I'm correct should this part be the same ?

programming is via boot mode,

Any solution?


Thanks in advance,

kire106ka
14th November, 2016, 12:02 AM
Try these you should write now

henal
14th November, 2016, 02:12 PM
Try these you should write now


Thanks will try today night,

i have one question, for this ecu does flash need to be same before engine start, what i mean i have fitted the ECU and using the car, can i still write your your file and engine will start ? i read somewhere the flash changes every time you start the car ??

Also Fgtech gives option for Checksum, if i want to correct it, shall i leave it as it is ?

Regards

bobolin4o
14th November, 2016, 05:00 PM
Mate, the easiest way to have original inside of the ECU is to make update with original diagnostic tool.
My advice is - go to the dealer to flash it!