Fiat Sedici key learning

[evisdaci]

I have a Fiat Sedici 1.6 16V petrol and i want to make a new key. But i don't know where is located the CODE, the immobox is : Siemens 5WK49182, and i have open this but i haven't see any memory there. So any information where i can find the CODE to programm new key.

thanks

[klesk1986]

Which year? If 2006 or similar it is Suzuki SX4 system. Lost time i made it by CK100 with PCF7935 or ID40 (i don't remember)

[evisdaci]

Is 2007 edition. Yes is like Suzuki SX4, but i haven't key CODE to programming the key. So i have for electronic Code to do the programming. Where can i find it ?

I have zed bull clone

[klesk1986]

With CK100 (similar to SBB) i didn't need any code

[Weasel3]

Fiat, Suzuki Siemens VDO immo
Eeprom / MCU MC68HC908AB16A(L72A), QFP, 64pin
File Size 512 Bytes
Original Transponder ID 40
Blank Transponder to Use PCF7935
Programmed transponder start the vehicle.
Supported Models Fiat: Sedici, Suzuki: SX4

[evisdaci]

Thanks Weasel3 but today i open the immo box and there is no any MCU or eeprom. This are photo from immo box :

[paul_12345]

Tango has picture showing part number 5WK49184 that looks like a pcf chip for handling coms so immo elsewhere.

[klesk1986]

Did you try by OBD? Maybe this will be easier way?

[ecuremap1]

I had this problem zedfull doesn't need pincode but program a ID46 not id40 but it works okay after that can program as a sx4 if I remember right

[evisdaci]

I have only zedbull. But important for me is to find where is the code ? Because in immo box it isn't

[paul_12345]

post some pictures of the immo box, also follow the cables to see where they go.

This is a SX4 immo box that looks like the one in tango help file http://i.ebayimg.com/images/g/wWEAAOSwt7pXNJMX/s-l1600.jpg

[p1et]

Locate ECU, open and show pictures

[castin]

Hawe the same problem. Sedici 2008. Any info where find pincode or locate immo key data. Hawe Tango, zedbull.