PDA

View Full Version : EFI Technology / PGT10



CARPARTS
14th November, 2016, 01:35 PM
Hi

Anyone knows how to read immo data from immo box , EFI Technology

Or how to open and what chip is inside ?

Its 2015 model, PGT10 , IT2507467, CM278901

Joe1986
7th August, 2018, 04:40 PM
Anybody knows how to read/write(tuning) this ecu?

Squadr33
11th September, 2018, 03:08 PM
have you found way to read on bench? trying to find what tool & driver to use

popov
23rd April, 2021, 01:08 PM
Still nothing? Maybe advanced scooter workshop...

f2f2
23rd April, 2021, 08:29 PM
Still nothing? Maybe advanced scooter workshop...

If need I have more used such ECU and there is 1 for sale brand new learns for 2 affected keys.
If you buy New ECU then after key learning bike no start only show fault.
I my new ECU prepare instant use.
Original Piaggio label and code

Frankcar
24th April, 2021, 05:42 AM
For program key on new ECU how i can do ?
thanks of your help

f2f2
24th April, 2021, 08:51 AM
For program key on new ECU how i can do ?
thanks of your help
new ECU....
New ECU minimum 2 pieces TEMIC-11 code system key
Ignition with masterkey 2sec ON and OFF
Ignition with servicekey1 2sec ON and OFF
optional Ignition with servicekey2 2sec ON and OFF
Ignition with masterkey 2sec ON and OFF
Learning done

But bike no started block works show yellow LED.
need Piaggio P.A.D.S.
or my software works COM1-COM9 PC work time 2 minute
and bike start no problem
ECU done

popov
25th April, 2021, 07:02 PM
If need I have more used such ECU and there is 1 for sale brand new learns for 2 affected keys.
If you buy New ECU then after key learning bike no start only show fault.
I my new ECU prepare instant use.
Original Piaggio label and code

Thanks for the offer but i am looking for solution how to read used ECU and program new transponders. "The way - how its made" :)

Thank you anyway!

f2f2
25th April, 2021, 11:12 PM
Thanks for the offer but i am looking for solution how to read used ECU and program new transponders. "The way - how its made" :)

Thank you anyway!
I try read file with Kline but the memory read reply blocking ECU.
gained system I can penetrate but memory access mode all command 4 pieces 34 3B 36 37
the 36 read block my parameter all try

f2f2
3rd November, 2021, 12:44 PM
PGT10
memory access Gained system
algorithm work results :
50% key sample correct done

50% = 32768 pieces

but memory reading big work