Mercedes vito w639 EZS adjust

[bonecrusher]

Hello Guys

I need some assistance here. not usually my thing but ...

Please adjust to 326 040 KM for me on this w639 EZS

regards

[jomberykaso]

Eeprom or processor inside?
Original mileage?.

[vageric]

here you have 0km.
put right mileage in dash and you'll be ok.

[bonecrusher]

Hello vageric, your dump did not work. but thanks for trying

The current odo on the EZS is 284 636km . I need it changed up to 326 040km. EZS has processor inside with mask 1l02m

[bonecrusher]

Hello Vageric.

The dump did not work the cluster still displays - - - - - -
The EZS mileage is 284 636km it has 1lo2m mask processor I need it changed to 326 040 km. This vehicles ecu was faulty so we purchased a whole set, ezs,ecu,lockset. Now the customer demands that he wants the original mileage on the cluster. The original mileage of the car is 326 040

Please help as I need to get this headache out!

[bonecrusher]

Sorry about the double post! I thought that the reply did not go through

[clusters]

Give this a go....

[diagtech]

If you put miles up in cluster ezs will be updated

[raf0468]

Hello Vageric.

The dump did not work the cluster still displays - - - - - -
The EZS mileage is 284 636km it has 1lo2m mask processor I need it changed to 326 040 km. This vehicles ecu was faulty so we purchased a whole set, ezs,ecu,lockset. Now the customer demands that he wants the original mileage on the cluster. The original mileage of the car is 326 040

Please help as I need to get this headache out!

did you also purchase instrument cluster with new set?
if not it needs to be adapted to the new ezs. hence the ----- on display

[vageric]

Hello Vageric.

The dump did not work the cluster still displays - - - - - -
The EZS mileage is 284 636km it has 1lo2m mask processor I need it changed to 326 040 km. This vehicles ecu was faulty so we purchased a whole set, ezs,ecu,lockset. Now the customer demands that he wants the original mileage on the cluster. The original mileage of the car is 326 040

Please help as I need to get this headache out!

it did not work because the dash SSID is different then the ezs SSID. that is why you have ------ in dash.
you have to make dash 0km and marry with ezs with tool like AVDI, STAR, ect ect.

[bonecrusher]

thanks for the explanation. I see my mistake. Any suggestions on how to make the mileage to 0 on the dash. To marry I have star , AVDI

[vageric]

thanks for the explanation. I see my mistake. Any suggestions on how to make the mileage to 0 on the dash. To marry I have star , AVDI

read dash eprom and calc to 0km
then write the 0km dump back to dash and mary to ezs.

[raf0468]

dash eeprom should have 95080 read and adjust to 0km or post dump which will then allow you to learn with star,
once learned ezs km 286xxkm will be transferred to dash automatically,
now to get 326xxkm which are higher than the original in ezs 286xxkm, re read 95080 and adjust to 326xxkm this new higher value will then be transferred automatically to ezs,
no ezs programming required,,

[bonecrusher]

Hello Guys just an update.

I ended up obtaining the matched cluster to the 2nd ecu/ezs set from the used parts guys. I then did the mileage calibration with AVDI all up to 326xxxkm. This is the rare occasion when I do mileage adjustment. Again thanks for all the expert advice. I really appreciate the time you guys take off to help.

[alclot]

Hi mates,
I found this post very interesting and I have a question: Can anyone help how to find the ssid number in ezs dump?
Thanks in advance ;)

[alclot]

Hi again. I find ssid on ezs (e8 23 a9 c0) but I need to know where is on dash ee. Can anyone help me?
Thanks again ;)