PDA

View Full Version : Megane/Scenic infrared key new key programming



cartech
14th September, 2009, 01:55 PM
Hello!
I need to know how to program new infrared key, on renault megane year 97.
now I'm starting just with 4 digits code with manually method.
I was trying with my renault clip but no success.
thanks a lot

nazz2
14th September, 2009, 02:30 PM
hi

You get pin code say its 2345

Turn ign on
Hold CDL button down, Red led on dash flashes slowly
Count 2 flashes then let go
Press it again
Count 3 flashes and let go,

Do the same for the next 2 numbers

Light should stay on solid,

Then hold CDL button, until doors lock/unlock, then press remote a few times.

nazz2

grezacediagnostics
14th September, 2009, 10:04 PM
BBA reman. ABS, ecu's, throttle bodies, air mass meters, and catalytic converters (http://www.bba-reman.com/content.aspx?content=Test_for_Renault_Key_im*obili ser_failures_emergency_recode)
link doesnt work click on link go to renault in common failures there you will see emergency recode procedure, hope this helps

racin-snake
17th September, 2009, 06:57 PM
check the interior light inside for water ingress
also if you put your keyfob in front of your mobile phone camera and press the fob if the ir led flashes your keyfob is working

teerak2uk
18th September, 2009, 10:27 AM
Test for Renault Key/im*obiliser failures (emergency recode)




Renault Key/im*obiliser



When you have the 4 digit emergency
1- hold central locking button down red im*o light flashes slowly count number of 1st digit of im*o code and release.
2- hold down central locking button and count 2nd digit and release
3- repeat for 3rd and 4th digits
4- when all numbers entered, ignition off and hold down central locking button im*o lights remains constant, press key on/off quickly towards interior mirror. Hopefully plip will resynch.
Once im*o light starts flashing -ign on/off and hold c/l button down again until red light remains constant and try again,may take a few goes.

cartech
19th September, 2009, 10:33 AM
hello all!
thanks for your answers, but u haven't understand my question.
I want to added (program) new IR key, I bought one new key from a locksmith.
I have clip, what's the procedure to program NEW key please.
I need this uregently.

grezacediagnostics
19th September, 2009, 10:37 AM
The new infra red key must be ordered from chassis, then the procedure from previous posts. If not ordered from chassis key no good for that vehicle
:party:

cartech
19th September, 2009, 10:54 AM
I think there are method my friend, by programming MCu of key.
I need help on that plz

cartech
26th September, 2009, 09:46 AM
any help there; I need help urgently.
or
who have virgin dump for 68hc05 of decoder uch of megane??????????????

dreadz123
26th September, 2009, 10:40 AM
regarding the security code? i bought 2nd hand 2001 scenic- but not history.

How am i able to get this code? will renault be able to supply me with it from their records?

dont want imobliser to fail and be stuck unable to input anything? cheers

cartech
26th September, 2009, 11:26 AM
I have security code
I want to methode to added new IR remote key..................
need help urgently............................please

mattray114
24th April, 2010, 09:43 AM
Hi... im having the same problem as cartech... i have a new key... but the 4 digit code is obviously different to my old key and the car im doesnt deactivate when this code is entered... did anyone find a solution to this?

kavan
25th April, 2010, 10:17 PM
even the mean dealer has problems repromming new keys in, just go to the scrap yard and find a reciever and key that is aready programmed in, if its a megane then swap the transponder chip over if it bothers you so much.
the central locking is the least of your problems, lol!

jmp16
24th June, 2010, 10:15 AM
i cant sync my car with the advice given:(

racin-snake
24th June, 2010, 06:57 PM
you can also off the immo orr virginise ecm this will let you add both keys even used ones :proud:

drivesure
26th June, 2010, 11:49 AM
do you have virgin file for me to add new/old keys into a different car? i would appreciate if you could upload.

thanks
siraaj

taz0305
27th June, 2010, 11:31 AM
Clip wont program keys on pre 2001 models, you need
the earlier tool X25.

racin-snake
28th June, 2010, 12:22 AM
clip version 93 will program keys mate
i know cos ive done it
also t300 will ans a few others ie mvp pro

cartech
28th June, 2010, 08:25 AM
wait please!!!!!!!
are u talking about IR key (without transponder) or RF key (with transponder)????????????

renault clip don't program IR key, I checked it a sevral times.


MVP can't program Ir key too, for renault megane year 1995-1998.

it have others ways to do????????????????,

nutloose
28th June, 2010, 08:26 PM
AFAIK IR Keys are PRE-CODED only.

Factory ordered to VIN.
S**** code will allow emergency access or bypass
E******* code with chip is factory order only (no EKA code)

dump micro from UCH to get pin or make type 33 transponder depending on year/model

racin-snake
28th June, 2010, 08:41 PM
oops sorry rf with transponder :argh:

teerak2uk
28th June, 2010, 09:16 PM
Sorry to jump on this thread guys but is there any way to code a used 2 button espace card into a 2004 renault espace 2.0ltr petrol or is it only via the dealer @ ?85+vat for keycard and ?45+vat coding


many thanks

velemaki
30th July, 2010, 09:57 AM
my red lamp wont flas 1 second its flashes 5 secconds somebody know answer
sorry on my bad english