View Full Version : DPF OFF not working Help please
Unichip77
21st November, 2016, 10:56 AM
Hello,
I recently purchased DPF off for Ford Focus 1.6 TDCI.
The car works, no cut back but after 500-700 km the dash says: DPF full.
The Differential pressure is 2hPA.
If any one could help...
Regards
Uni
Apsik
21st November, 2016, 11:04 AM
Hello,
I recently purchased DPF off for Ford Focus 1.6 TDCI.
The car works, no cut back but after 500-700 km the dash says: DPF full.
You should contact the person who sold you DPF_OFF file in a first place
Babos
21st November, 2016, 11:09 AM
Hello,
I recently purchased DPF off for Ford Focus 1.6 TDCI.
The car works, no cut back but after 500-700 km the dash says: DPF full.
The Differential pressure is 2hPA.
If any one could help...
Regards
Uni
Sure car have problem with that shit mod file!!there is no DPF
chipdanix
21st November, 2016, 04:39 PM
The solution VOLTA :upset: It will not work
Correction manual will be fine
radoslawwiklik
21st November, 2016, 07:24 PM
Manual solution for dpfoff.
Apsik
21st November, 2016, 09:14 PM
No offense Uni - in any way Search does not hurt
http://www.digital-kaos.co.uk/forums/showthread.php/447145-EDC16C34-DPF-OFF-instructions-for-Ford-focus-1-6-TDCI
(http://www.digital-kaos.co.uk/forums/showthread.php/447145-EDC16C34-DPF-OFF-instructions-for-Ford-focus-1-6-TDCI)
akos90
21st November, 2016, 10:22 PM
Here you go!
DPF off file.
blazej1200
21st November, 2016, 10:51 PM
Here you go!
DPF off file.
one switch is not enough to properly turn off the dpf
Unichip77
22nd November, 2016, 08:51 AM
Hi,
thank you for yor help.
Is it a flash file trough OBD and need checksum calculated?
Regards
UNI
Unichip77
22nd November, 2016, 08:54 AM
Thanks for your replay.
I am not lazy but lack of experiences. That is why I buy files. Maybe the supliers should pick more carefully.
But you know, at the beginning everybody says he is the best money can buy.
Regards
UNI
ecutuners
22nd November, 2016, 09:14 AM
I would look for another supplier, if he can't make this old ecu then doesn't look good for new generation Ecu's
chipdanix
22nd November, 2016, 09:28 AM
You can also ask for help and start to learn. You help others / help you :stung:
Unichip77
1st December, 2016, 01:30 PM
Manual solution for dpfoff.
Hi,
Thank you for your help.
The software you sent was put into the ECU and after few hours there were 3 DTC-s and MIL light on:
P244A DPF Pressure low
P2002 Particle trap efficiency below treshold
P0134 O2 sensor no activity
Any idea?
Regards
Uni
catala20032004
1st December, 2016, 04:26 PM
your dpf off file. Pass PM
Unichip77
1st December, 2016, 05:16 PM
your dpf off file. Pass PM
Hi,
Checksum calculated?
Galletto BDM write.
Regards
catala20032004
2nd December, 2016, 03:13 PM
checsum ok
Unichip77
9th December, 2016, 10:43 AM
Hi,
thanks again for your help.
I put the file in to the ECU.
There is a P244A-60 error in the ECU but no MIL.
I can delete the trouble code but at the next engine start it is appearing again.
Regards
UNI
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.