DPF OFF not working Help please

[Unichip77]

Hello,

I recently purchased DPF off for Ford Focus 1.6 TDCI.
The car works, no cut back but after 500-700 km the dash says: DPF full.
The Differential pressure is 2hPA.

If any one could help...

Regards
Uni

[Apsik]

Hello,

I recently purchased DPF off for Ford Focus 1.6 TDCI.
The car works, no cut back but after 500-700 km the dash says: DPF full.

You should contact the person who sold you DPF_OFF file in a first place

[Babos]

Hello,

I recently purchased DPF off for Ford Focus 1.6 TDCI.
The car works, no cut back but after 500-700 km the dash says: DPF full.
The Differential pressure is 2hPA.
If any one could help...


Regards
Uni
Sure car have problem with that shit mod file!!there is no DPF

[chipdanix]

The solution VOLTA :upset: It will not work
Correction manual will be fine

[radoslawwiklik]

Manual solution for dpfoff.

[Apsik]

No offense Uni - in any way Search does not hurt
http://www.digital-kaos.co.uk/forums/showthread.php/447145-EDC16C34-DPF-OFF-instructions-for-Ford-focus-1-6-TDCI

(http://www.digital-kaos.co.uk/forums/showthread.php/447145-EDC16C34-DPF-OFF-instructions-for-Ford-focus-1-6-TDCI)

[akos90]

Here you go!
DPF off file.

[blazej1200]

Here you go!
DPF off file.

one switch is not enough to properly turn off the dpf

[Unichip77]

Hi,

thank you for yor help.
Is it a flash file trough OBD and need checksum calculated?

Regards
UNI

[Unichip77]

Thanks for your replay.
I am not lazy but lack of experiences. That is why I buy files. Maybe the supliers should pick more carefully.
But you know, at the beginning everybody says he is the best money can buy.

Regards
UNI

[ecutuners]

I would look for another supplier, if he can't make this old ecu then doesn't look good for new generation Ecu's

[chipdanix]

You can also ask for help and start to learn. You help others / help you :stung:

[Unichip77]

Manual solution for dpfoff.


Hi,

Thank you for your help.
The software you sent was put into the ECU and after few hours there were 3 DTC-s and MIL light on:
P244A DPF Pressure low
P2002 Particle trap efficiency below treshold
P0134 O2 sensor no activity

Any idea?

Regards
Uni

[catala20032004]

your dpf off file. Pass PM

[Unichip77]

your dpf off file. Pass PM


Hi,

Checksum calculated?
Galletto BDM write.

Regards

[catala20032004]

checsum ok

[Unichip77]

Hi,

thanks again for your help.
I put the file in to the ECU.
There is a P244A-60 error in the ECU but no MIL.
I can delete the trouble code but at the next engine start it is appearing again.

Regards
UNI