View Full Version : help immo Keypad IAW 1AP.40
mrpower
22nd November, 2016, 02:59 PM
I need your help
disable keypad or immo off
regards
Miguel rocha
baltazar3
22nd November, 2016, 03:25 PM
I need your help
disable keypad or immo off
regards
Miguel rocha
Here is...write file in 28f512 and cut immo line
vlaki electric
22nd November, 2016, 03:45 PM
easy way to make off is read tms and post dump
mrpower
24th November, 2016, 12:57 PM
easy way to make off is read tms and post dump
I do not have tool to read TMS374
mrpower
24th November, 2016, 12:58 PM
Here is...write file in 28f512 and cut immo line
OK THANKS
pin 48 right?
vlaki electric
24th November, 2016, 03:34 PM
I do not have tool to read TMS374
xprog can read this tms easy
gkogkolos
27th March, 2017, 10:12 PM
No need to read TMS if it is dif for you, me either I dont prefer to use TMS way, so follow these steps and everything will goes fine just like I do for many years ;-)
1. You have to desolder from the IAW1AP.40 28F512 chip.
2. You have to CUT 27 and 48 pins.
3. You have to erase 28f512 and flash the clock file I attach you and power on ecu on the bench or on the car for 2 minutes, whatever you prefer.
4. You have to erase chip and flash again your original file.
Your car will start like a charm and never lock again, no need to remove immobox.
Press Reputation +1 = Password in PM
regards
MOHAMMADKM
7th April, 2017, 09:23 PM
hello.
i need password.
please help me
thank you
umutoto
24th January, 2019, 08:58 AM
No need to read TMS if it is dif for you, me either I dont prefer to use TMS way, so follow these steps and everything will goes fine just like I do for many years ;-)
1. You have to desolder from the IAW1AP.40 28F512 chip.
2. You have to CUT 27 and 48 pins.
3. You have to erase 28f512 and flash the clock file I attach you and power on ecu on the bench or on the car for 2 minutes, whatever you prefer.
4. You have to erase chip and flash again your original file.
Your car will start like a charm and never lock again, no need to remove immobox.
Press Reputation +1 = Password in PM
regards
hi. please password
alclot
8th February, 2019, 01:53 PM
Hi mates,
I did clock on this unit but after that ecu doesnt get communication anymore. Did you find this problem? Can I fix it?
thanks in advance ;)
panos_k
8th February, 2019, 06:45 PM
Will communicate when you have immo off or synhro with key. Write again correct ori file.
Better way immo off is from TMS374.
carlab237
18th March, 2019, 11:28 PM
Please help pass
mnem
27th March, 2019, 05:16 PM
Please help pass
iceto
18th July, 2023, 08:28 AM
Hello
Can I get a password for the file?
Please
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.