2003 Audi a4 ecm read with galletto in boot mode??

[AudiS4]

Hello I read a me7.5 ecu today with a galletto clone.The ecu info looks good.It was read in boot mode.However.When I input the bin into winols or tuner pro with the definition file I have for this ecu none of the values make sense.Can anyone tell me why??Ecu is a 518AK.

This is the file it read.Can anyone tell meif its a good read or not??Also does winols use the same dll to correct checksum for me7 and me7.5??or a different dll??412125

[Apsik]

Hi

your file is OK
8E0909518AK 1.8L R4/5VT 0006
1037378109

TunerPro definition file was made for:
8E0909518AK 1.8L R4/5VT 0003
1037368072

Your software is newer than the one the definition file was made for.

[AudiS4]

Does that mean I will have issues using that xdf???I was looking at Krkte value and what it reads is 5.4966 but I was under the assumption it should be much much lower around 0.1039??Also Can I flash a lower software level into the ecu so I can use that XDF to edit accordingly??Also is the vin stored in the flash file??and immo id or is it all on 95040 and its all separate??

[Apsik]

Does that mean I will have issues using that xdf???
You can't use the xdf from lower version


I was looking at Krkte value and what it reads is 5.4966 but I was under the assumption it should be much much lower around 0.1039??
XDF does not match your SW. Your assumption is correct - KRKTE is lower.


Also Can I flash a lower software level into the ecu so I can use that XDF to edit accordingly??
You can flash lower SW without issue.


Also is the vin stored in the flash file??and immo id or is it all on 95040 and its all separate??
vin, immo all is stored in 95040

[AudiS4]

Ok Perfect This is what I will do.Thanks for your time.

[Act Tuning]

You have a buton for thanks, he help you so much, at least click some thanks and mybe rep if it help you, but i can understand why, 97 downloads and 1 thanks,

[AudiS4]

No need to be rude!I appreciate the help.
You have a buton for thanks, he help you so much, at least click some thanks and mybe rep if it help you, but i can understand why, 97 downloads and 1 thanks,

[Johnner]

Good edit mate...and just in time too....take it easy please ;)

[AudiS4]

LMAO I realized its just not worth getting down to his level thats all.After all this forum is about sharing information.I dont want to make any enemies.Which I do appreciate considering this if for my personal car.
Good edit mate...and just in time too....take it easy please ;)

[AudiS4]

Here you go ACT Tuning.I know you probably have a Virgin 95040 dump.This will work with me7.1 and me7.5 audi/vw vehicles.You can reflash a used ecu with this and adapt using vcds like it a new ecu.Makes things easy!!DO NOT USE THIS FOR ME7.1.1 or any other motronic systems other than what I listed.

412348