VW Caddy problem

[delectric]

Hi,it's a 2011 1.6 hdi Vw caddy. I would egr off it, it start to show egr dtc more and clean it but not succesfully.413014. Best regads. Many thanks.

[delectric]

Please I need it.

[tricore3]

your file off
correct crc

dont forget thanks and report
pass in PM

[kinketotua]

Here
you can unplug egr. with checksum ok414278

[NOX]

Hi,it's a 2011 1.6 hdi Vw caddy. I would egr off it, it start to show egr dtc more and clean it but not succesfully.413014. Best regads. Many thanks.

Hi friend,
I advise you to also do dpf off
you could have problems with only EGR OFF
the DPF
If you need help please contact me

Have a nice day:stung:

[delectric]

Now i'm in a big problem :02.47-tranquillity:. I have unlocked ecu like another cars with pcr 2.1. I try to write the file trough obd and show me ERROR ECU REJECT PROGRAMMING. Now the car doens't start and can't write any file.

There is anyway to start the car again?

I extract 25640 eprom and read it. Here is, 415181

Please any help would be appreciated.
Best regards.

[delectric]

Anyone?

Please I need a solution.

[kinketotua]

what file you write?

[delectric]

i try with your file and then with the one i have read from the ecu

[icezero2010]

i try with your file and then with the one i have read from the ecu

have you write ori back ??

post ori eeprom and mod

[delectric]

The files i have are here.

[icezero2010]

The files i have are here.

test with this eeprom

[delectric]

I have test and still ecu reject. I think the flash file i have read was modded. Anyone have stock flash file for this ecu?

Many thanks.

[icezero2010]

I have test and still ecu reject. I think the flash file i have read was modded. Anyone have stock flash file for this ecu?

Many thanks.

flash look ok but i what are what are the bytes after unlook i do it to 0 test i think thats protection bytes

[delectric]

flash look ok but i what are what are the bytes after unlook i do it to 0 test i think thats protection bytes

Ok so i would try it tomorrow. Also I have found a stock file 415310 . I have tried flashing it, and do another unlock and flash it but with not success.

Please i need a solution.

Regards.

[kospoz]

Find someone with vas and try to upload original file.i think that you can also do it with vag can pro.which tool you have for pcr?

[icezero2010]

Ok so i would try it tomorrow. Also I have found a stock file 415310 . I have tried flashing it, and do another unlock and flash it but with not success.

Please i need a solution.

Regards.

If this Not work you Must flash with odis or vcp i think this is the only way

[NOX]

Hi friend
Upload flash VCP, CMD, ODIS Engineering

[icezero2010]

Check mesuring Block 497 with vcds if Ecu really unlockt

[delectric]

Check mesuring Block 497 with vcds if Ecu really unlockt
I have tested but with vag com now only shows ecu id and can't read any parameter.

Regards

[gttuning]

only way now is flash with avdi,vcp,odis.

[delectric]

Find someone with vas and try to upload original file.i think that you can also do it with vag can pro.which tool you have for pcr?
Galleto

Enviado desde mi GT-I9505 mediante Tapatalk

[delectric]

only way now is flash with avdi,vcp,odis.
So anyway of solution it writing eprom externaly and flahing ecu by obd with Galleto?

[gttuning]

So anyway of solution it writing eprom externaly and flahing ecu by obd with Galleto?
Put ecu back to car and look for 03L9066023CTsgo.file
And galleto cant flash this typ of file.
You need avdi..vcp..odis

Sent from my SM-G935F using Tapatalk

[delectric]

Put ecu back to car and look for 03L9066023CTsgo.file
And galleto cant flash this typ of file.
You need avdi..vcp..odis

Sent from my SM-G935F using Tapatalk
The problem is that here i doesn't know anybody that has any of it interfaces.

Only one that has CMD.

Many thanks.
Regards.

[gttuning]

The problem is that here i doesn't know anybody that has any of it interfaces.

Only one that has CMD.

Many thanks.
Regards.
I dont think CMD will work.

Sent from my SM-G935F using Tapatalk

[delectric]

And with a second hand ecu could solve the problem?

[gttuning]

And with a second hand ecu could solve the problem?
Yes but you need tools man.look for some one with proper tools and maybe that can be fix.
To learn secondhand ecu you need.. dealer ..or Avdi.

Sent from my SM-G935F using Tapatalk