View Full Version : Saab EDC16C39 DPF
CoeraPejo
2nd December, 2016, 04:17 PM
Hi,
possible remove DPF control with EDC16C39 SAAB 9-3?
Thanks and good day
twchnodictator
5th December, 2016, 12:45 PM
Here you go 413560
Pass PM
CoeraPejo
5th December, 2016, 04:40 PM
Thanks for your help
bobolin4o
5th December, 2016, 04:43 PM
Not so bad for a free help...
Now you can spend some time to restore all DTCs, except the DPF related...
pike
5th December, 2016, 06:57 PM
Presumably, DPF off file above will not work.
CoeraPejo
12th December, 2016, 11:26 AM
Hi, the file create a problem in Saab.
Possible solution with sensor DPF unplug?
Thanks and good day
tricore3
12th December, 2016, 11:32 AM
your file off
press thanks and rep
austseller
20th February, 2017, 10:36 PM
I have a problem,
I have a bdm100 tool, I use a soft DimSport to read a ECU
Its saab 95 1.9tid, it is edc16c39, however the software shows it as a VAG family, and does not allow to read entire file.
Who has a normal software to read ecu properly?
then i need someone to disable egr, dpf and flaps
Thanks
430208430209
d3v1l
20th February, 2017, 11:04 PM
I have a problem,
I have a bdm100 tool, I use a soft DimSport to read a ECU
Its saab 95 1.9tid, it is edc16c39, however the software shows it as a VAG family, and does not allow to read entire file.
Who has a normal software to read ecu properly?
then i need someone to disable egr, dpf and flaps
Thanks
430208430209
You don't know how to use your software? you should select the protocol manually, where suppost to be vag on the side there is a menu down " V " click on and select the protocol of your ecu
430220
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.