CITROEN XSARA

[neimy]

HI ALL view i need help
pin code or immo off
413693413695

[doctore]

HI ALL view i need help
pin code or immo off
413693413695
Citroen: Xantia 2001>
do You have this chip 95040/93C66 inside

[neimy]

i dont see

[gokart]

Check what is near the white relay. or Is the car equipped with keypad?

[neimy]

you can see this picture there no 04 or 93c66413703

[kiszka]

...................

[neimy]

he has coil on key cylinder

[kiszka]

...............

[doctore]

maybe you mast read this MCU ST90T40C6-LP I'm not sure

[neimy]

there is solution . immo off any idea ?

[kiszka]

...............

[doctore]

the rear side of the plate eeprom or read processor ST


what is your solution for for this immo box texton Kiszka

[kiszka]

...............

[neimy]

If it helped me to extract the code

[doctore]

post dump from ecu someone will help you immo off

[neimy]

i try read but mask different i have
xprogme
orang5
minipro
but dont have mask TI28F512

[neimy]

413787I read it different mask

[Zmann]

Nothing to do with 28F512. Search immo of '1AP.xx' ECU or may try with so called clock file. But I read direct to TMS374 by Xprog.

[neimy]

413908ok body i read flash tms374 i need pin code please

[neimy]

any body help pin code from tms374

[vlaki electric]

any body help pin code from tms374
there is no pin in this ecu.why you dont post numbers and tipe of ecu to make off? 1APxx?

[neimy]

my friend i send picture before
IAW 1AP 40
1.4
PATROL
MAGNET MARELLI
FLASH TI 28F512

[neimy]

It happens that I can not write on the flash... only I can read...withe xprog

[vlaki electric]

yust write this in tms,on way that you read from it.true the board and flash... its gona work dont worry. unplug immo box.. pass in pm
414137

[doctore]

It happens that I can not write on the flash... only I can read...withe xprog

tray this
1? Open ECU and Read the memory (28F512) and save it
2nd Record the file that is delivered in the vehicle's memory 28F512
3? Connect the ECU in the vehicle and connect the contact for 50 seconds without starting the vehicle (if it is started involuntarily, it must start the procedure again)
4? Remove the memory and re-program the original memory of the vehicle, cut the communication pin of the immobilizer that arrives at the central and ready, the vehicle will no longer have immobilizer425211

[neimy]

MY PROBLEM withe write flash ...
how i can read write withe mini pro?
just i can read withe xprog...