View Full Version : Astra H 2008 temic 13 251 079
FantomSPb
6th December, 2016, 03:07 PM
Guys, help with the block 13 251 079. Corrected a bug hanging B1000.
Thanks!
Guys, help with the block 13 251 079. Corrected a bug hanging B1000.
dragon100
6th December, 2016, 03:24 PM
Try and report.
FantomSPb
6th December, 2016, 04:15 PM
Your bad-ok identical to my OK
Your bad-ok identical to my OK
dragon100
6th December, 2016, 10:25 PM
That's all are ok.
Moldovan1
6th December, 2016, 10:33 PM
With OP-COM can clear 2 times crash from Airbag ECU on Astra H by OBD connection. Or this Temic is something special?
FantomSPb
7th December, 2016, 08:28 AM
Maybe the problem is hardware? Today will bring another block. I will try.
FantomSPb
7th December, 2016, 02:09 PM
ECU was faulty. Replaced ECU, I filled your file OK and everything worked. Guys, thank you all!
auto80
8th December, 2016, 12:54 AM
ECU was faulty. Replaced ECU, I filled your file OK and everything worked. Guys, thank you all!
well done m8 :)
Cheers
haykojan99
11th December, 2016, 11:45 AM
hi i have a temic 13251084 this is of astra twin top 1.9 diesel , how can i read it and clear the crash ? in tachosoft i dont have this module.
auto80
12th December, 2016, 01:31 AM
read 9S12DG128 processor and post dump here
haykojan99
12th December, 2016, 08:15 PM
ok , thank you but i dont found the pinout in xprog 5-55 ? they are the microchip 9s12dg256 showing can you sendme this pinout ? i dont know if they have to lift any pin for read?
sorry for my english
Moldovan1
11th April, 2017, 10:41 PM
ok , thank you but i dont found the pinout in xprog 5-55 ? they are the microchip 9s12dg256 showing can you sendme this pinout ? i dont know if they have to lift any pin for read?
sorry for my english
Yes, this is an old thread, but for future. Why you dont use cheaper OP-COM, where can make this job easily and fine over OBD in 1 min?
haykojan99
12th April, 2017, 08:18 AM
Thanks friend , i did remplace the kit airbag Andr?s evrithing is done , now i trying to calibrate the steering angle but that imposible , my scanner cant Connect to pump module. Have you experience with this module to how testing the canbus ?
ismailelachhab
12th April, 2017, 11:01 AM
442512
test and report and thanks
Moldovan1
12th April, 2017, 11:14 AM
Thanks friend , i did remplace the kit airbag Andr?s evrithing is done , now i trying to calibrate the steering angle but that imposible , my scanner cant Connect to pump module. Have you experience with this module to how testing the canbus ?
Are you mean Steering hydraulic pump? On Astra H steering pump is on Kline (quote - i work only with 1.3 CDTI). All other ECU is on CAN. But steering angle sensor belongs to CIM module and not to Steering pump.
haykojan99
12th April, 2017, 12:50 PM
Yes ! I working too with 1.3 cdti when its brokening the timming chain and the crankshaft , the hidrualic pump i seen 2 cables multiplexor , i dont know when i doing the calibration there is no passing never ... And if no have comunication with the hidrualic pump that is no problem with calibration ?
Moldovan1
12th April, 2017, 01:00 PM
Post here errors from CIM and from ABS/ESP module. And a never saw steering pump on CAN, only on Kline in Astra H.
haykojan99
17th April, 2017, 12:23 AM
And why i have this dtc in the cim-3300 - u2111 this os from ephs
haykojan99
17th April, 2017, 12:25 AM
B1020 , b1012
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.