PDA

View Full Version : FREE FOR DK - Real 4.036 and 6.070 dumps, not public untill now



ecutuners
7th December, 2016, 09:11 PM
I give you here real 4.036 and 6.070 FW dumps. NOT 3.099 and 5.001 with serial changed!, these are actual firmwares.
Put your serial and cfg and tool ready, NO need to load update folder and use device.fmw and device.tos to update now.

Untill now these were not public, ANYWHERE, now you have them

Thanks and rep if you can be arsed

And finally NO PASS

Enjoy

smokey08
7th December, 2016, 09:34 PM
What are they for? KTAG? I thanked anyway because you have posted them with no password.

ecutuners
7th December, 2016, 09:36 PM
What are they for? KTAG? I thanked anyway because you have posted them with no password.

Kess 4.036 and ktag 6.070 mate

smirnoff_rules
7th December, 2016, 09:36 PM
l see your 6.070 is different to this one thats been around for abit . whys that ? also whats the serial for your f/w m8 http://www.digital-kaos.co.uk/forums/showthread.php/562431-K-TAG-Update-5-001-to-6-070-Again?p=2904601&viewfull=1#post2904601

is it the same L14015743

ecutuners
7th December, 2016, 09:47 PM
l see your 6.070 is different to this one thats been around for abit . whys that ? also whats the serial for your f/w m8 http://www.digital-kaos.co.uk/forums/showthread.php/562431-K-TAG-Update-5-001-to-6-070-Again?p=2904601&viewfull=1#post2904601

is it the same L14015743

ktag same serial and other dumps for ktag are 5.001 with serial changed and needs update files to get to 6.070 and this is the 6.070 actual dump what you update to

pulsar2000
7th December, 2016, 09:59 PM
Bleeding Heck Danny Generous of you, Festive spirit or something ? LOL
now i wonder if Santa has a delivery coming my Way ??? Been a while, could do with back

Reckon youve done quite nicely lately looking on Ebay with the MPPS :> good on ya

teamtuner
7th December, 2016, 10:07 PM
let understand better please...what means real fw?
let understand better please...you posted 2 bin files...so...you reflash nxp with one of this...and?...what?
let understand better please...and?...after that?...if all will be ok...tokens?
and for understand better please...what is difference between your bin files updated and the other bin files that use update to be new fw?...have something more?
and...using your bin file...will be no process of update?...how will be writed the initial empty sdcard?

morgano
7th December, 2016, 11:39 PM
This is real firmware for you to study it if you want, not a ready made spoonfeed pack for everybody's use.

Thanks danny for the gift ;)

masciaro
8th December, 2016, 02:57 AM
let understand better please...what means real fw?
let understand better please...you posted 2 bin files...so...you reflash nxp with one of this...and?...what?
let understand better please...and?...after that?...if all will be ok...tokens?
and for understand better please...what is difference between your bin files updated and the other bin files that use update to be new fw?...have something more?
and...using your bin file...will be no process of update?...how will be writed the initial empty sdcard?

let understand better please....Why do you always attack all people? You know everything about everything or you only talk about the work of others?

teamtuner
8th December, 2016, 08:55 AM
let understand better please....Why do you always attack all people? You know everything about everything or you only talk about the work of others?
masciaro...
i don"t attack nobody
i only asked about...and also i thanks to ecutuners
so...be gentile and eat your words with the mouth closed

tango
8th December, 2016, 10:53 AM
tbh i would have thought you of all people would understand what these are
theres fw files means there is no need to flash nxp with the shit old files that we all said before was really 3.99(kess) and 5.001(ktag)
which then was needed to do update with update folder full of families etc
as you know those dumps are just old with changed serial so the update folder can do the update
these fw files are true versions therefore flash nxp with these and use the coresponding sd card files for the fw
ie sdcard files you have for 6.70(ktag) and this new flash = no messing about

benzerrouki
8th December, 2016, 11:28 AM
First i would like to thanks ecutuners for sharing. so my question is : what software to use with this 2 dumps please like (ex 2.08 or 2.11 ) thanks again

tango
8th December, 2016, 11:33 AM
First i would like to thanks ecutuners for sharing. so my question is : what software to use with this 2 dumps please like (ex 2.08 or 2.11 ) thanks again

you just answered your own question
why would there be any other software to use ???
kess 4.036 uses no higher software than 2.08
ktag 6.070 uses no higher software than 2.11
this is stated many many times on all forums over the internet etc

benzerrouki
8th December, 2016, 11:41 AM
you just answered your own question
why would there be any other software to use ???
kess 4.036 uses no higher software than 2.08
ktag 6.070 uses no higher software than 2.11
this is stated many many times on all forums over the internet etc

Thanks for reply tango can you help me to provide me ver 2.11 for Ktag cause i dont have it

morgano
8th December, 2016, 11:42 AM
I guess people understand nothing of this.

There is no benefit in the end situation about using these dumps or update the old way. You finish either on 4.036 or 6.070 so same firmware level means same software needed. 2.08 and 2.11

The only difference here is that you have access now TO SEE what was hidden before into the LPC, the real firmware. Is it so difficult to understand?

This is for study only.

spychu14
8th December, 2016, 04:15 PM
SD cards content for this dumps ?

morgano
8th December, 2016, 06:05 PM
It seems explaining something here is a timewaste. People don't understand or even worse don't want to understand. :(

spychu14
8th December, 2016, 08:40 PM
Everything is on forum but none made tutorial from start to end how to update kess/ktag. I've updated mine but I don't understand everything. I could make video and instructions with files - all in one place...

kukukatsu
8th December, 2016, 09:36 PM
Everything is on forum but none made tutorial from start to end how to update kess/ktag. I don't understand everything.

yes it's true, to many threads and posts

smirnoff_rules
8th December, 2016, 09:38 PM
simple search google for kess jlink and add the bin you want

crackerx
10th December, 2016, 03:56 PM
nothing complete for free or any forum

smirnoff_rules
10th December, 2016, 04:09 PM
nothing complete for free or any forum

these bin's are tho ?

tango
10th December, 2016, 06:53 PM
to make it simple these bins replace the older bins
so do same as you would have before and flash these instead
only next step is you dont need to mess about with any update folder so leave it empty
sdcard files are posted with older bin files so use them
simples

2xded
11th December, 2016, 03:27 PM
I give you here real 4.036 and 6.070 FW dumps. NOT 3.099 and 5.001 with serial changed!..........


It would be interesting "Free for DK KESS = 5.005 , KTAG = 7.003" :)

plasma533
11th December, 2016, 03:30 PM
dont need to use them but thanked @ECUTUNERS for the time and trouble of getting them up here :)

spychu14
11th December, 2016, 08:06 PM
Can you post sd card contents ?

smirnoff_rules
11th December, 2016, 08:07 PM
Can you post sd card contents ?

read the posts again m8 u dont need sd files

yellowstilo
11th December, 2016, 09:45 PM
to make it simple these bins replace the older bins
so do same as you would have before and flash these instead
only next step is you dont need to mess about with any update folder so leave it empty
sdcard files are posted with older bin files so use them
simples

So if i understand correctly - when i want to update my old Kess V2 with 1.89 software / 3.099 firmware i must reflash the mcu with this new hex file (post no. 1 ) - erase my SD card and write the contents of older SD 4.036 which was still based on the SD 3.099 version and then i would be able to run the Original 2.08 K Suite software ?
It would be nice if someone could confirm or explain the update procedure in a few clear steps....
Thank you for your help !

yellowstilo
12th December, 2016, 04:32 PM
So if i understand correctly - when i want to update my old Kess V2 with 1.89 software / 3.099 firmware i must reflash the mcu with this new hex file (post no. 1 ) - erase my SD card and write the contents of older SD 4.036 which was still based on the SD 3.099 version and then i would be able to run the Original 2.08 K Suite software ?
It would be nice if someone could confirm or explain the update procedure in a few clear steps....
Thank you for your help !

anyone can briefly explain the correct procedure to update the older Kess v2 1.89 / 3.099 with this 4.036 dump ? what must be done besides the MCU reprogramming to update to v2.08 ? I read a lot of threads on this subject but i'm still confused, i really would appreciate a little help from the more experienced members....

thank you for any help !

morgano
12th December, 2016, 10:05 PM
Use old/normal update way. More straightforward.

yellowstilo
12th December, 2016, 11:09 PM
Thank you for your reply - I have files for the 2.08 softwareversion update but probably with the fake 4.036 firmware (modified 3.099 ?) - so can i just program the real 4.036 file of this thread instead of the fake one and follow the rest of the update procedure ?

smirnoff_rules
12th December, 2016, 11:15 PM
install it onto nxp no need for the update files

yellowstilo
13th December, 2016, 11:46 AM
thank you, one more question please : what do i have to change on my SD card of the old Kess v1.89 version ? Can i put the contents of the V2.08 sd card files and it will work ?
I'm sorry for all questions but i still find it rather confusing , have to rely on the more experienced members....

yellowstilo
13th December, 2016, 02:56 PM
just a quick update - i updated myKess v1.89 to v2.08 using files i previously downloaded.
Now i have v.2.08 but still with firmware 3.099 - can i now just reflash my tool with the ori firmware of post #1 and will that work rightaway or do i need to do extra changes ?
Sorry for my ignorant questions but i need some help on this one.....

Thank you, DK rocks !

Youneselm
13th December, 2016, 04:12 PM
This is usefull if you have the cfg file and update files for this serial. If not Then Its useless!!!
Like he Says in first post. Non of these files are public.


Verzonden vanaf mijn iPhone met Tapatalk

tango
13th December, 2016, 04:16 PM
updating software is just simply coping the sw to a folder and running it
you have updated nothing
if you read all the updating info on how to change fromn 3.099 to 4.36 you would see the info i put above will work
ie flash the new bin 4.036 (instead of the old bin which was still 3.099 with changed serial)
copy 4.036 sdcard contents to sdcard
that is it
other way was you had to flash the old bin, then copy update folder files etc and do update with the sw
because the bin wasnt real 4.036
another way to look at it is see how you would do the 4.24 update
only other problem is this will lock to crp3 so no going back (4.024 might also still be the better 1 to use for now)

tango
13th December, 2016, 04:44 PM
This is usefull if you have the cfg file and update files for this serial. If not Then Its useless!!!
Like he Says in first post. Non of these files are public.


Verzonden vanaf mijn iPhone met Tapatalk

yep just looking into it and its a different serial and client/group code so yes cfg file will be needed

morgano
13th December, 2016, 07:34 PM
What throws us to the point i already tried to explain. For update use old way, FOR STUDY use this bin. Easy as that.

smirnoff_rules
13th December, 2016, 08:02 PM
its not L14015743 ?.. l didnt know that

tango
13th December, 2016, 08:41 PM
Not looked at the Ktag bin but kess bin is not the same serial

gazvts
13th December, 2016, 08:48 PM
Not looked at the Ktag bin but kess bin is not the same serialhaven't downloaded either file whats serial on kess bin ?

kitnoos2002
13th December, 2016, 09:42 PM
KESS V4.036 : K09021274_C1364

KTAG V6.070 : L14015743_C5328

gazvts
14th December, 2016, 01:29 PM
I give you here real 4.036 and 6.070 FW dumps. NOT 3.099 and 5.001 with serial changed!, these are actual firmwares.
Put your serial and cfg and tool ready, NO need to load update folder and use device.fmw and device.tos to update now.

Untill now these were not public, ANYWHERE, now you have them

Thanks and rep if you can be arsed

And finally NO PASS

Enjoy
Danny whats different in this kess dump compared to :
K10033818= cars,bikes,trucks
K09021102= cars,bikes,trucks,tractors
is there a token/ cfg file an SDcard files available ?

pepepolla
15th December, 2016, 01:56 PM
Hi
i flashed my ktag with posted file and now...
415649
i use but new sdcard but dont help...
Thanks

morgano
15th December, 2016, 04:51 PM
Curious way to study the dump :)

teamtuner
15th December, 2016, 05:29 PM
Hi
i flashed my ktag with posted file and now...
415649
i use but new sdcard but dont help...
Thanks
thhh
to save your tool
do now the update classically with ksuite

teamtuner
15th December, 2016, 05:30 PM
Danny whats different in this kess dump compared to :
K10033818= cars,bikes,trucks
K09021102= cars,bikes,trucks,tractors
is there a token/ cfg file an SDcard files available ?
K09021102= cars,bikes,trucks,tractors

tractors?
is maybe the 4.024?

gazvts
15th December, 2016, 06:02 PM
K09021102= cars,bikes,trucks,tractors

tractors?
is maybe the 4.024?you nothing better to do ?
i wanted to know what the difference was in the dump ecutuners uploaded compared to the 2 fly'in around the net ie. protocols ,CFG SD-Card files or Update files , unless you know i prefer a constructive answer not quotes plz!

pepepolla
15th December, 2016, 07:34 PM
Ksuite update dont work!
Sdcard is initialized but no customer Code or group code

teamtuner
15th December, 2016, 09:47 PM
you nothing better to do ?
i wanted to know what the difference was in the dump ecutuners uploaded compared to the 2 fly'in around the net ie. protocols ,CFG SD-Card files or Update files , unless you know i prefer a constructive answer not quotes plz!
mate
the difference you can see with hexcomp...bin from 4.036 K10033818 and compare with .bin from ecuxxxx...will see another client code and also you will see that ecuxxxx"s bin have inside the protocols and all shi+ that need to doing the same things like the other .bin file after update...so...nothing news...maybe a little trap?...another client code?...will work with only ecuxxxxx cfg files to reset?...mmm...maybe need to think more about:withstupid:

ecutuners
15th December, 2016, 10:25 PM
I give you here real 4.036 and 6.070 FW dumps. NOT 3.099 and 5.001 with serial changed!, these are actual firmwares.
Put your serial and cfg and tool ready, NO need to load update folder and use device.fmw and device.tos to update now.

Untill now these were not public, ANYWHERE, now you have them

Thanks and rep if you can be arsed

And finally NO PASS

Enjoy

No trap. All is written in first post " put your serial and cfg "

gmb45
17th December, 2016, 06:16 PM
dk is not the place for arguing the toss about shoite files tools etc, if you have problems with stuff you have bought off another member take it to pm or some other way, NOT IN THE FORUMS !!!

DR Race
24th January, 2018, 10:08 PM
Kess 4.036 and ktag 6.070 mateHi , sorry to bother, I have a problem with my ktag 7.020 China, work perfect read whrite but don't make checksum corection automatic, can you help me with that , I don't know where is the problem!

Trimis de pe al meu SM-G930F folosind Tapatalk

pulsar2000
24th January, 2018, 10:36 PM
Hi , sorry to bother, I have a problem with my ktag 7.020 China, work perfect read whrite but don't make checksum corection automatic, can you help me with that , I don't know where is the problem!

Trimis de pe al meu SM-G930F folosind Tapatalk

You will be Lucky, OP. ECU Tuners harder than Osma bin laden to get hold off
rumour has it hes sitting it out in some disused yorkshire Mineshaft, until his new identity is created
thats the rumour :>

DR Race
24th January, 2018, 10:39 PM
You will be Lucky, OP. ECU Tuners harder than Osma bin laden to get hold off
rumour has it hes sitting it out in some disused yorkshire Mineshaft, until his new identity is created
thats the rumour :>I don't understand this, is this a joke or ???

Trimis de pe al meu SM-G930F folosind Tapatalk