2013 Passat Cluster pinout

[techterr]

Hello DK...
Does anyone know which pins of the 32 pin plug in the back of a 2013 NEC cluster equals the key antenna? on the jetta and golf they are 7 & 8, but either I am doing something wrong, or the pinout is different... With my bench cable it doesn't see the chip...
Any ideas??
Thanks in advance...

[wojciech300]

If passat is form EU immo is in comfort not in cluster.

[dune85872005]

change smd tranzistor from power to ic em4093.....after that it will detect the transponder.....i have the same problem last week...immo on dash......

[H2Deetoo]

EU and Australian Passat have immo in the comfort module, so coil is connected to comfort module and not to cluster.

[techterr]

2006-2011 Passats in US have immo in CCM... 2012 they went back to Immo in cluster with keyed ignition... Dune, I feel rather stupid asking this, but could you clarify???? Where is SMD transsistor? I am trying to do this on the bench... Yet when I flash the 24C64 chip and get into sevice mode, I can see the chips I programmed in the immo...
Thanks in advance..

[Maartinj]

post picture from back

[techterr]

414881

I compared the tracks on the board to a 2013 jetta, they are different... When you put a reader on the antenna, it works with the 2013 jetta, but shows nothing with the passat cluster...need to find someone who has a later version of all data...
414882

[Maartinj]

Passat PQ35 platform with immo in cluster
but your cluster show KEY not in range, not KEY not find
post screen from immo data

[techterr]

Here is the snippet of the cluster after I programmed a couple of keys to it... I am able to program keys to it, but it isn't able to read the chip... That is why I was asking if anybody had a pinout for the cluster...
414909

[Maartinj]

screen is soo big , my 22" LCD not good

[techterr]

Sorry, tried to resize it and failed...