i need help clearing a NISSAN 2005 TITAN 285567S002 airbag module

[aedaz]

I need help clearing a NISSAN 2005 TITAN 285567S002 airbag module .
I have used a carprog 7.28 but I still get the code B1209.
Thanks

[badziewo]

Here yo go.
:)

[aedaz]

Thank you badziewo for the clear data. but it did not work. This time I had more code pop up and the airbag indicator light was flashing. i still need help.

[badziewo]

Did you replaced blown airbags and or seatbelts?

[TRANSFORM]

if you have collision detect after clear crash should do pass seat program

[aedaz]

Did you replaced blown airbags and or seatbelts?

yes I did replace seatbelts and blown airbag

[badziewo]

Then post codes from srs module after you load my cleared bin.

[credoline]

Try n report

[aedaz]

Thank you badziewo and credoline for the clear codes, they are almost the same clear. Badziewo your clear had Code 1081 and B1086( i replaced the seat belt and harness but i still had the codes which makes me believe its from the clear. Credoline clear had NO DTC Fault code but still had the airbag light ON( i believe no communication between SRS unit and diagnostic tool) still a code problem i believe. I changed the airbag clock spring. does anyone know how to get the light off with any of the situation.
thanks

[credoline]

Check measuring blocks in airbag module, to see values of resistors of airbags and to check seat belts and to check status of sensors. To find are
all components good.
If not, find here another crash dump and clear him same as we did it.

[roro8]

clear ok 100%
not forget thanks and tell me

[credoline]

I think i found what i clear wrong. Check now.