View Full Version : airbag seat cordoba 2003
jjas40
19th September, 2009, 05:26 PM
hello
need help.
I need to file eeprom 24c08 clear crash and dtc
airbag vw5
6Q0 909 605S
seat cordoba year 2003
thanks in advance for your help
sixpack
19th September, 2009, 05:51 PM
hello
need help.
I need to file eeprom 24c08 clear crash and dtc
airbag vw5
6Q0 909 605S
seat cordoba year 2003
thanks in advance for your help
post your bin file plz
jjas40
19th September, 2009, 06:07 PM
hello
file crash 24c08
the ecu is
6Q0 909 605S
331 296 INDE X07
THANKS
sixpack
19th September, 2009, 06:30 PM
hello
file crash 24c08
the ecu is
6Q0 909 605S
331 296 INDE X07
THANKS
try this one and post results, btw... you must delete dtc's with diagnostic scanner
jjas40
19th September, 2009, 06:53 PM
hello
does not work with this file.
stored faults:
CRASH DATA STORED 35-00
AIRBAG IGNITER,DRIVER SIDE (N 95 ) 32-10
THANKS
sixpack
19th September, 2009, 07:03 PM
did you delete the dtc's from car?
btw, you MUST replace "AIRBAG IGNITER,DRIVER SIDE "
episcop
19th September, 2009, 07:07 PM
hello
does not work with this file.
stored faults:
CRASH DATA STORED 35-00
AIRBAG IGNITER,DRIVER SIDE (N 95 ) 32-10
THANKS
Try this file, and emule with 2.4 oms AIRBAG IGNITER,DRIVER SIDE
sixpack
19th September, 2009, 07:25 PM
Try this file, and emule with 2.4 oms AIRBAG IGNITER,DRIVER SIDE
why emulate ?
this is playing with some one's live ...
jjas40
19th September, 2009, 07:53 PM
hello
Like this file.
not working
FAIL 35-00 CRASH DATA STORED
please need help
thanks
sixpack
19th September, 2009, 07:58 PM
hello
Like this file.
not working
FAIL 35-00 CRASH DATA STORED
please need help
thanks
read what i did post, if your car was in a crash, replays the seat belt ignitor and what ever airbag that did go off
jjas40
19th September, 2009, 08:12 PM
hello
the car accident.
driver airbag and belt shot.
these are now new.
the ecu is not new I try to recover
sixpack
19th September, 2009, 08:17 PM
hello
the car accident.
driver airbag and belt shot.
these are now new.
the ecu is not new I try to recover
check all connectors again plz, and delete the dtc's again
episcop
19th September, 2009, 08:47 PM
why emulate ?
this is playing with some one's live ...
Emulate wehn jobs with firmware ECU, after needs replase.
jjas40
19th September, 2009, 10:37 PM
hello
connectors every is ok.
I can not remove dtc and crash data stored.
thanks
jjas40
20th September, 2009, 09:17 PM
hello
I've tried one file.
after this log:
65535 - Internal Control Module Memory Error
00-00 - -
need help please
thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.