View Full Version : CAS3 eeprom or flash corructed
forumsrg
15th December, 2016, 11:59 PM
Hello everyone. I am having problems with this E90 CAS3.
I try to connect by obd using Multi Tool and it is no working.
Nothing works. When I insert the key in the slot it wont do anything.
I think the eeprom is corrupted.
Please take a look at the eeprom and flash and give advice.
I'm using ak500 to read the chip. MCU is 0L01Y.
415780
doctore
16th December, 2016, 12:09 AM
The cars worked after this problem or not and wath you do after demage
intell
16th December, 2016, 12:16 AM
Nothing works. When I insert the key in the slot it wont do anything.
I think the eeprom is corrupted.
First, You should read errors from cas module with use diagnostic tool.
yugo45
16th December, 2016, 07:06 AM
Starnge thing is that file is register as CAS 2.
2 keys adopted
241499 Km on it.
Eeprom looks good to me.
Most of the time I see same problem, Ribbon cable gets mess up when pulling down , check this first.
tech_cz
16th December, 2016, 01:47 PM
Flash is OK.
Try repaired Eeprom.
Pass PM.
WBR, Marek
415880
bendy
16th December, 2016, 07:05 PM
Eeprom looks good to me.
Most of the time I see same problem, Ribbon cable gets mess up when pulling down , check this first.
Agree with above, ribbon cable, How worried was I until I found that one out.....
raf0468
16th December, 2016, 09:17 PM
Agree with above, ribbon cable, How worried was I until I found that one out.....
he states hes done it OBD with multitool , so cant be ribbon problem.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.