PDA

View Full Version : Kess V2 clone Conection fail Opel Corsa



NoXPT1988
16th December, 2016, 07:24 PM
Hello

I can not connect my kess v2 clone, on an opel Corsa c, 1.3cdti with an Magnetti Marelli ECU, ref: MJD 6JO.C2.


Is there any specific procedure for these cars?


Regards

centrohifi
16th December, 2016, 07:38 PM
Bad clone !! the procedures are those, which says the SW! disassemble ECU and read in bdm !!

NoXPT1988
19th December, 2016, 08:09 PM
Bad clone !! the procedures are those, which says the SW! disassemble ECU and read in bdm !!


Hi!
Thank you!


I tried to access the ECU through the cable obd galletto and I was able to upload the file, it happens that during the download of the new file to the ecu, I hear a voltage loss and I could not complete the download.
Now when I try to pass the file back to the ECU, I can not do it and I get the following errors:


"Writing InitilizationERRORE dataSK"
"Seed key ... Erasing ... changing speed error"


Someone who can give me a hand, please?

NoXPT1988
19th December, 2016, 10:33 PM
Someone please , help!! =(

pulsar2000
19th December, 2016, 11:49 PM
Looks like your in some trouble,
and BDM might be able to help you recover,
if you look in your FGTECH docs you will see BDM info
lets hope not china clone as BDM sucks on most unless you got lucky,,,

NoXPT1988
20th December, 2016, 12:45 AM
Thank you pulsar.

I think i found the BDM file, but i dont have the skills and the tools to do it.

May be, i have to prepare to buy another ecu and imobilizator =(

Thank you guys

Regards