PDA

View Full Version : FAP & EGR REMOVAL ON DELPHI DCM 3.4



koolstuff
18th December, 2016, 12:22 AM
Hello, Chip tuners professional
I have a 307 with a Delphi DCM 3.4 with FAP on it, i have a lamp check that shows and everytime i clear default DTC it comes back after few miles. So i wanted to get it removed i read the ecu with both KESS V2 & GALLETO (See Attached Files) and removed the fap with VOLTA at first it worked but came back after two days and i did it with ECUSAFE and it came back again.
Can anybody please help me reomve this annoying FAP & EGR system on the files that i uploaded, i want both FAP & EGR removed.
I read the ecu with KESS & GALLETO so you can see the difference from the two files.
Thanks

koolstuff
18th December, 2016, 12:23 AM
If somebody could remove the FAP & EGR on both files so i can test them on the car to see if it will show antipolution system failure again. Because ecusafe can read the file made by Galleto. Thanks

koolstuff
18th December, 2016, 03:29 AM
this thread has a lot of view and still no answer, Are the profs sleeping?