PDA

View Full Version : KESS V2 4.036 and Ksuite problem.



RLine
20th December, 2016, 11:54 AM
Hello

I want to read a Siemens ppd 1.xx ( Audi A3 8P BMN) and KSuite say that the protocol not working with the Firmware, but I have the newest 4.036 ?

anybody the same problem? what can i do ?

I have use 2.06 , 2.11, 2.15, 2.25, 2.28 always the same error

best regards

flashtech
20th December, 2016, 01:03 PM
Hi! Could You post screenshot of error here?

RLine
20th December, 2016, 01:40 PM
http://uploads.tapatalk-cdn.com/20161220/41628a9acc27004226edbc52ba41858a.jpg

Gesendet von meinem HTC One mit Tapatalk

teamtuner
20th December, 2016, 02:23 PM
use mpps or fgtech

RLine
20th December, 2016, 02:55 PM
No Chance with kess?

Gesendet von meinem HTC One mit Tapatalk

RLine
20th December, 2016, 04:25 PM
Other people the same problem on Audi 8p BMN ?

optimaplus
21st December, 2016, 12:48 AM
Select CAN instead of K line it will work then

RLine
22nd December, 2016, 09:52 AM
I cant select anything. First click in list on the Motor i became this message....

smirnoff_rules
22nd December, 2016, 09:56 AM
havnt tried this ecu , but the only software you havnt tried is 2.08 which is the right version for your f/w

RLine
22nd December, 2016, 10:02 AM
2.08? Ok I am trying this today THX

skcelectronic
12th February, 2017, 09:18 AM
I have a solution for Kess v2 "PROTOCOL NOT COMPATIBLE WITH VERSION FW"
can help you428014
contact me at pm

if help you you can click THANKS and REP :-)

tango
12th February, 2017, 02:13 PM
and why have to contact you by pm?
why not just tell all your sollution?
only reason for pm is you must be asking for payment for the sollution

morgano
13th February, 2017, 09:09 AM
Simply remake the families update with correct update pack.

teamtuner
13th February, 2017, 02:00 PM
I have a solution for Kess v2 "PROTOCOL NOT COMPATIBLE WITH VERSION FW"
can help you428014
contact me at pm

if help you you can click THANKS and REP :-)
ok
can we see your solution?

Hello everyone, super forum
Thank you!....in this forum we help free

skcelectronic
14th February, 2017, 08:38 AM
Hey guys, it's no trouble, I give you a solution.
Do not share outside the Forum

Format the kess SD card in fat 32

Open the folder sd unlock, select all the files, copy them and paste them on the sd card
formatted

Insert the SD in kess


Copy the folder ksuit 2.08 mct to C

Install the drivers through driver folder

copy the file K10033818.CFG and paste it in the folder of the ksuit 2.08 mct

Connect the kess

https://drive.google.com/file/d/0B7zlT2i...1pdnc/view (https://drive.google.com/file/d/0B7zlT2itL93oOFhfNUdBU01pdnc/view)

Please your help, see post

http://www.digital-kaos.co.uk/forums/showthread.php/576246-Renault-Kangoo-1-5DCI-Tuning?p=2956661#post2956661

teamtuner
14th February, 2017, 10:01 AM
Hey guys, it's no trouble, I give you a solution.
Do not share outside the Forum

Format the kess SD card in fat 32

Open the folder sd unlock, select all the files, copy them and paste them on the sd card
formatted

Insert the SD in kess


Copy the folder ksuit 2.08 mct to C

Install the drivers through driver folder

copy the file K10033818.CFG and paste it in the folder of the ksuit 2.08 mct

Connect the kess

https://drive.google.com/file/d/0B7zlT2i...1pdnc/view (https://drive.google.com/file/d/0B7zlT2itL93oOFhfNUdBU01pdnc/view)

Please your help, see post

http://www.digital-kaos.co.uk/forums/showthread.php/576246-Renault-Kangoo-1-5DCI-Tuning?p=2956661#post2956661
mate
there is nothing new here...you make again the update of tool by ksuite with update folder full of families...also,writing content of sdcard before this update...mmm...when you do the update,the sdcard will be again rewrited
here is help request:

http://www.digital-kaos.co.uk/forums/showthread.php/576246-Renault-Kangoo-1-5DCI-Tuning?p=2956739#post2956739

skcelectronic
14th February, 2017, 10:50 AM
Hey guys, first try and then tell right works.
Tried to more Kess devices that could read and Siemens are now working normally.