PDA

View Full Version : WHITE Sky Card?


satwino
20th September, 2009, 02:48 PM
Hi All, does anyone know about the card reader modification you can do on the 7020 I think it concerns a resistor swap? so the White sky cards dont burn out....they run at a lower voltage?
tia Andy
firestorm
20th September, 2009, 03:59 PM
if you use your card with newcs you can lower the voltage by going into var/tuxbox/config/newcs.xml
then you will see a script like this in edit mode chane the <mhz>358</mhz> to alter the voltage


<readers name="Dreambox SCI">
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>None</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>Hard</priority>
Jack Jumpin
23rd September, 2009, 02:22 AM
Will this work in a 7000 as well do you know ??

Thanks
JJ
firestorm
23rd September, 2009, 03:48 AM
yes you will be able to change the voltage buy doing this but there is a bit more to do to get the card to work there is a thread on here about it
www.1234max.com
29th June, 2010, 09:19 AM
if you use your card with newcs you can lower the voltage by going into var/tuxbox/config/newcs.xml
then you will see a script like this in edit mode chane the <mhz>358</mhz> to alter the voltage


<readers name="Dreambox SCI">
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>None</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>Hard</priority>
<MHZ> is the unit for frequncy and has nothing to do with Voltage,measured in V <volts> my Friend
ohno
29th June, 2010, 09:53 PM
Hi All, does anyone know about the card reader modification you can do on the 7020 I think it concerns a resistor swap? so the White sky cards dont burn out....they run at a lower voltage?
tia Andy
my white sly card running without problem constently for over 10 months in 7020 no mod and cccam 214 since the day it was released justblock emm and update in sly box at the moment.