PDA

View Full Version : EDC 17CP14 Bricked. Please help.



mario313
23rd December, 2016, 09:22 PM
Please help. EDC17CP14 dead after flash galleto. ECU is antitunning.:mad-new: :mad-new::mad-new::mad-new:

Thanks417438

Babos
23rd December, 2016, 09:23 PM
i think start check if you have 2000e for fix problem in very bad situacion :(

smirnoff_rules
23rd December, 2016, 09:28 PM
so you cant write these in boot mode then ?

o l see you write in obd first .. brave man
you must be able to write ori if someone has it ,, post all hw and sw numbers
cant you write ori back with ktag and patch it so you can obd it next time

cpe87
23rd December, 2016, 09:33 PM
try to review the boot line, this ecu is antituning, but the tricore are booted no have problem

icezero2010
24th December, 2016, 12:57 AM
Please help. EDC17CP14 dead after flash galleto. ECU is antitunning.:mad-new: :mad-new::mad-new::mad-new:

Thanks417438

here a flash file

1.write the file in boot
2. ecu in car
3.flash again over obd

icezero2010
24th December, 2016, 01:02 AM
so you cant write these in boot mode then ?

o l see you write in obd first .. brave man
you must be able to write ori if someone has it ,, post all hw and sw numbers
cant you write ori back with ktag and patch it so you can obd it next time

the flash from him is ok

file is tprot_v07

his eeprom has set protections bits

mario313
24th December, 2016, 05:52 PM
All thank you very much for the advice. the problem is already solved. He helped me from the forum user cawadany mhhauto.com. I wish you a merry Christmas.

smirnoff_rules
24th December, 2016, 07:06 PM
All thank you very much for the advice. the problem is already solved. He helped me from the forum user cawadany mhhauto.com. I wish you a merry Christmas.

that will be icezero2010 above then . leave him a rep m8

DR Race
28th January, 2018, 10:27 AM
Hy guys,same Problem by me, golf 6 2.0tdi cbdb bricked ecu, I have opened ecu all good , make backup read with kess , read flash , tune it stage 1 , try to whrite flash back all work till 60 % there stop whriting , ecu bricked , now with kess I have tryed recovery and kess 5.017 Euro clone make no id and no recovery, it pop up Micro wake up!!
Tri to read with ktag 7.020 China , sometimes I have id , sw but Ktag stop reading after 2 sectors and pop up a communication error, is there anyway to bring this ecu back to live! Thenks in advance I am located in Germany Wetzlar

Trimis de pe al meu SM-G930F folosind Tapatalk

morgano
28th January, 2018, 10:34 AM
Your ktag not good, otherwise read and write without problems.

DR Race
28th January, 2018, 10:38 AM
Your ktag not good, otherwise read and write without problems.Stupid China red Ktag , today I will sell all of them ! An buy a original, if somebody can help near my location 35576 wit a ori ktag read it will be appreciated!

Trimis de pe al meu SM-G930F folosind Tapatalk

powerfulmotorsport
28th January, 2018, 11:28 AM
need to fix eeprom and ırom and write boot mode after will be ok

DR Race
28th January, 2018, 11:33 AM
need to fix eeprom and ırom and write boot mode after will be okMy ktag can not read after flash, read 1 sector ant then pop in communication error, with kess I have made backup read but kess can not connect to this ecu, recovery mode pop up Micro wake up!

Trimis de pe al meu SM-G930F folosind Tapatalk

voltechcar
28th January, 2018, 11:40 AM
write to me in skype I help you, you no need open ecu and read . Write number ecu or printscreen wirh kess

DR Race
28th January, 2018, 11:44 AM
write to me in skype I help you, you no need open ecu and read . Write number ecu or printscreen wirh kessI have done all in Boot Mode, read ,whrite, Backup read but after Boot Mode flash fail I can not reach ecu anymore, what is your Skype name??

Trimis de pe al meu SM-G930F folosind Tapatalk

DR Race
28th January, 2018, 11:48 AM
Here some fotohttps://uploads.tapatalk-cdn.com/20180128/7f5ed5b5a3be9ec80b7f57d6a531665d.jpghttps://uploads.tapatalk-cdn.com/20180128/13a8589bd2f62e67adb64334c58c4d68.jpghttps://uploads.tapatalk-cdn.com/20180128/29babb2ecced1e652860a0c2a27102bc.jpghttps://uploads.tapatalk-cdn.com/20180128/0a60c34c6c17888688b41d9e2fd6231a.jpghttps://uploads.tapatalk-cdn.com/20180128/05c44527c70ce86e13771e4eac7955e0.jpg

Trimis de pe al meu SM-G930F folosind Tapatalk

DR Race
28th January, 2018, 11:54 AM
I doo always this ecu type on boot mode till now I worked only with ktag and no problem , this time I have made mistake to do this job with kess , on the back of the ecu label it's damaged nothing left there from rain and corrosion!https://uploads.tapatalk-cdn.com/20180128/eea1fb544a38ab0c38a4b1b4d290888b.jpghttps://uploads.tapatalk-cdn.com/20180128/23c239dff5cdb9a088bbcd37ba9c5fac.jpghttps://uploads.tapatalk-cdn.com/20180128/3feb2c350ca85774bef9413c89f4811e.jpghttps://uploads.tapatalk-cdn.com/20180128/d525868afdfa49ca4eb5c794490f6693.jpghttps://uploads.tapatalk-cdn.com/20180128/41031fc6b9455a34362cfb2ec55906a0.jpghttps://uploads.tapatalk-cdn.com/20180128/08263e1d38e8600d25f3bd47f565b3a5.jpg

Trimis de pe al meu SM-G930F folosind Tapatalk

smirnoff_rules
28th January, 2018, 12:00 PM
forget that thinking off pcr

DR Race
28th January, 2018, 12:11 PM
write to me in skype I help you, you no need open ecu and read . Write number ecu or printscreen wirh kessI need your Skype name, here somr.foto from ecu !https://uploads.tapatalk-cdn.com/20180128/f9c4e07ee4544cc159873c7c49aa443a.jpg

Trimis de pe al meu SM-G930F folosind Tapatalk

DR Race
30th January, 2018, 07:31 PM
Good News guys , ECU back to live , problem for flash fail I think it was stupid China powersuply , it should have 30V/5A but that only on theory , I have done recovery with kess wit original backup , I used a 90 A car battery with a 22 A charger then kess has made recovery, with this powersuply only micro wake up , I have tried from 12 V - 15 V but nothing worked , then I took car battery and all ok !

Trimis de pe al meu SM-G930F folosind Tapatalk