bmw x5 edc16c31 Boost limiter removal

[dimitar]

Can someone please remove boost limiter completely

i have made several attempts without success

i have raised boost limit map and SVBL to 3500mb but it cuts out again

thanks in advance

[sonic 1989]

Can someone please remove boost limiter completely

i have made several attempts without success

i have raised boost limit map and SVBL to 3500mb but it cuts out again

thanks in advance please boost 3500mbar pass pm

[Act Tuning]

you can be have other issue in the maps,

[kire106ka]

What dtc you have

[dimitar]

you can be have other issue in the maps,

no issues in maps, the file is original

[dimitar]

What dtc you have

charge pressure to high, this is a project car i need to remove the boost limiter only

[dimitar]

[QUOTE=sonic 1989;2918287]please boost 3500mbar pass pm[/QUOTE

]still have problem... car goes in limp mode

already tried

F940C boost limit map
F961E svbl

[kire106ka]

See now if it is ok

[dimitar]

See now if it is ok

same problem
fault 4521 turbocharger pressure too high

[voltechcar]

you have problem mechanical in turbo, any change im maps not results and you have this problems, I try many times

[dimitar]

you have problem mechanical in turbo, any change im maps not results and you have this problems, I try many times
i know what the problem is i just need all turbo boost pressure limiters off
This is a project car

[icezero2010]

i know what the problem is i just need all turbo boost pressure limiters off
This is a project car
Simple Job set all allow different to 1000mbar negativ and positiv or more

[dimitar]

Simple Job set all allow different to 1000mbar negativ and positiv or more
Can you please elaborate more????

Are you sure this will work???

[icezero2010]

Can you please elaborate more????

Are you sure this will work???

Yes that work 100% i Check tomorow your file and Look gor the adress

[icezero2010]

i think you have no original ols here for old ols

for all

Pasitiv allow different F9FB8

Negative allow different F9FBC

there is one another map but this is 0 and this is why i think its not active if this not work set it to 4000

PCR_pFltValLim_C

[dimitar]

Sorry for the long delay

I have set boost map and svbl to 3500mbar

positiv allowed difference to 1000mbar

Everthing works great no limp

i cant thank you enough

[kikirixis]

. MB bn MCB MCB. MC
CV
C
B v Mvnņ BBC bn.BB nnbb . Mn

Sent from my S60 using Tapatalk