View Full Version : bmw x5 edc16c31 Boost limiter removal
dimitar
24th December, 2016, 10:19 PM
Can someone please remove boost limiter completely
i have made several attempts without success
i have raised boost limit map and SVBL to 3500mb but it cuts out again
thanks in advance
sonic 1989
24th December, 2016, 10:31 PM
Can someone please remove boost limiter completely
i have made several attempts without success
i have raised boost limit map and SVBL to 3500mb but it cuts out again
thanks in advance please boost 3500mbar pass pm
Act Tuning
24th December, 2016, 11:03 PM
you can be have other issue in the maps,
kire106ka
25th December, 2016, 12:27 AM
What dtc you have
dimitar
25th December, 2016, 11:39 AM
you can be have other issue in the maps,
no issues in maps, the file is original
dimitar
25th December, 2016, 11:41 AM
What dtc you have
charge pressure to high, this is a project car i need to remove the boost limiter only
dimitar
25th December, 2016, 12:29 PM
[QUOTE=sonic 1989;2918287]please boost 3500mbar pass pm[/QUOTE
]still have problem... car goes in limp mode
already tried
F940C boost limit map
F961E svbl
kire106ka
25th December, 2016, 02:05 PM
See now if it is ok
dimitar
25th December, 2016, 05:56 PM
See now if it is ok
same problem
fault 4521 turbocharger pressure too high
voltechcar
25th December, 2016, 06:32 PM
you have problem mechanical in turbo, any change im maps not results and you have this problems, I try many times
dimitar
25th December, 2016, 07:05 PM
you have problem mechanical in turbo, any change im maps not results and you have this problems, I try many times
i know what the problem is i just need all turbo boost pressure limiters off
This is a project car
icezero2010
25th December, 2016, 07:21 PM
i know what the problem is i just need all turbo boost pressure limiters off
This is a project car
Simple Job set all allow different to 1000mbar negativ and positiv or more
dimitar
25th December, 2016, 10:15 PM
Simple Job set all allow different to 1000mbar negativ and positiv or more
Can you please elaborate more????
Are you sure this will work???
icezero2010
25th December, 2016, 11:32 PM
Can you please elaborate more????
Are you sure this will work???
Yes that work 100% i Check tomorow your file and Look gor the adress
icezero2010
26th December, 2016, 11:49 AM
i think you have no original ols here for old ols
for all
Pasitiv allow different F9FB8
Negative allow different F9FBC
there is one another map but this is 0 and this is why i think its not active if this not work set it to 4000
PCR_pFltValLim_C
dimitar
28th December, 2016, 05:20 PM
Sorry for the long delay
I have set boost map and svbl to 3500mbar
positiv allowed difference to 1000mbar
Everthing works great no limp
i cant thank you enough
kikirixis
28th December, 2016, 05:45 PM
. MB bn MCB MCB. MC
CV
C
B v Mvnņ BBC bn.BB nnbb . Mn
Sent from my S60 using Tapatalk
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.