12 Mercedes C250 W204 EZS problem

[alexG]

Hi.
I need some help .
I got 12 Mercedes C250 W204 in my shop EZS no communication .The car is dad . I got the other EZS from junk .
Read it by Abrites ,make it Virgin recode Vin and make new key . Later I made the oter key. Now I have 2 keys.
When I put key in to the car it say wait for activating then key get active door start working .
But when I try to start the car turn ignition and nothing no light on dash no start totally dad. ESL no sound .
Checked by Xentry all keys activated all authorization OK but I can not find out the problem .
I made some photo pleas look

[ibrasport]

i think proplem esl u make it virgin then u must record it by vvdi or abritus .

[mercis]

esl fatal error

[alexG]

Thanks my friends, so what the beast way to fix this problem ? I did not program ESL . I did only EZS if I will make ESL virgin and program back ,but I don't now if it will help .
Maybe ESL emulator ?

If yes, who know good one pleas .
Thanks a lot

[mercis]

yes,emulator best solution,i use xhorse emu

[vanos batam]

Xhorse emu will work

[ilian_cho]

You say that original EZS is death. When you make 2-hand ezs virgin what fbs data uoy use for prsonalization? Orig (from 2-hand ezs) or read from another module from the car? And do you see one from this erors in to the ezs?417681

[alexG]

Hi. I used from -from 2-hand ezs) yes sometimes I see it :(

[alexG]

420467Today I installed ESL emulator and now I can turn ignition on. But the car steel is silence . Pleas who can look and advice what to do. When I do diagnostic on ECU I see parts number not visible .
Maybe ECU went bad to?
see photo

[Pyromaniak]

put on diagnostic and see if working starting in parameters. Try with els emulator old ezs too... Look under hood for fuses if your ecu is not pressent.

[alexG]

Sorry for now --Engine No Start

[mercis]

emulator no activated
no 15 on can
no start enabled

[alexG]

Hi. I will try to do activation .What do you think about ME and ETC ? Thanks

[mercis]

if esl activated,no need ME and ETC renew and activate

[alexG]

Ok I got it will go try .Thanks
When I do turn key in ignition emulator activating and aloud to tern ignition on . But steel no signal to starter
????????????????????

[mercis]

check fuse and start relay,sam front

[ilian_cho]

1-if you use second hand EZS with difrent fsb data car newer start. 2-when you put esl emylator you must to do personalization using fsb data from ezs with known pasword.

[alexG]

check fuse and start relay,sam front






Hi .
I checked no signal to start relay ,When I put 12v on the starter relay the starter start spinning .

[alexG]

1-if you use second hand EZS with difrent fsb data car newer start. 2-when you put esl emylator you must to do personalization using fsb data from ezs with known password.

Hi.
I use same EZS with same fsb data . I did personalization good you can see on the pfoto . Very strange why ECU and transmission not aloud to start the car .
I made some more photo pleas look and advise .

[alexG]

421614
1-if you use second hand EZS with difrent fsb data car newer start. 2-when you put esl emylator you must to do personalization using fsb data from ezs with known password.

Hi.
I use same EZS with same fsb data . I did personalization good you can see on the pfoto . Very strange why ECU and transmission not aloud to start the car .
I made some more photo pleas look and advise ..
Thanks a lot

[ilian_cho]

Explane as haw you instal esl emulator. Step by step.

[alexG]

Hi. ok let see https://www.youtube.com/watch?v=xAeU7hP5oZk&t=2s

This I got from Abrites customer support -"Since the emulators are reusable and they are not Mercedes ESLs they never get activated. Please ignore this section as the EM001 works without activation"

https://www.youtube.com/watch?v=bLSKtHRkQ0M

[mercis]

You can use the ABRITES Software for Mercedes to personalize the emulator (FREE OF CHARGE, NO TOKENS - available for all AVDI owners with valid AMS and special function MN026) or you can personalize the emulator with a green key in the same way as an original ESL (necessary ONLY for W204, W207 and W212

[alexG]

Hi. Yes .

[alexG]

Hi,
ok I got start today . I removed ECU and made it virgin . install on the car and car start and running good .( Just made virgin , no any programming )
Transmission not working I think need same think .
Thanks friends for all your help .
Alex