View Full Version : EDC16u1 via OBD
RLine
29th December, 2016, 06:43 AM
Hello
How I can read and write a EDC16u1 on the table without car ? I want to this via obd and pinout ...
Or is it only per bdm ?
svetoslav86
29th December, 2016, 08:55 AM
Bdm you can read its easy operation, but need to open ecu
Enviado desde mi iPhone utilizando Tapatalk
svetoslav86
29th December, 2016, 08:58 AM
http://uploads.tapatalk-cdn.com/20161229/77f67259b165793d94426e93ca94f3a7.jpg
Or using obd tool and this type of conection
Enviado desde mi iPhone utilizando Tapatalk
cawadany
29th December, 2016, 10:40 AM
On table via pinout you can read but not write.
Babos
29th December, 2016, 10:42 AM
On table via pinout you can read but not write.
Yes it is true i try before and read ok write NO!
cawadany
29th December, 2016, 11:04 AM
To write Immo must be Off
RLine
29th December, 2016, 04:04 PM
how is the best way for immo off without car
cawadany
29th December, 2016, 04:07 PM
Open ecu and bdm.
icezero2010
29th December, 2016, 06:43 PM
On table via pinout you can read but not write.
You can write After Immo off :)
dadal
11th February, 2018, 12:51 AM
immo is stored in eprom ?? if so eprom is extern ( separate) or in mcu ?? ( need to read over BDM)?
morgano
11th February, 2018, 08:24 AM
immo is stored in eprom ?? if so eprom is extern ( separate) or in mcu ?? ( need to read over BDM)?
Immo data and switch are stored in eeprom yes, and it is separare chip 95xxx family.
dadal
11th February, 2018, 05:26 PM
Thanks Morgano
I think that I found eprom
506157
morgano
11th February, 2018, 09:27 PM
You did.
Regards
dadal
12th February, 2018, 12:49 PM
Can I change mileage also in ECU or need dash? carprog has an option in the menu " change mileage"
I dont have ecu, I m collecting info about it
Thanks
Vasily.U
12th February, 2018, 03:51 PM
Carprog working with EDC16 ecu only with A1+ adapter.
dadal
12th February, 2018, 09:40 PM
Works only with A1+(A1 PLUS) new generation ODB2 adapter(the same as for S7.9 Volvo dash).
A1+(A1 PLUS) its not the same as A1 which is included in CarProg basics package.
If don't have A1+ (A1 PLUS) adapter, have to order it additionally.
your are right,,found it on carprog website,,
and how about clone device's ? we can also update it ( with A1+ cable )...or other option ?
Vasily.U
12th February, 2018, 11:10 PM
Try to order it additionally))) for chinese clone
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.