EDC16u1 via OBD

[RLine]

Hello
How I can read and write a EDC16u1 on the table without car ? I want to this via obd and pinout ...

Or is it only per bdm ?

[svetoslav86]

Bdm you can read its easy operation, but need to open ecu


Enviado desde mi iPhone utilizando Tapatalk

[svetoslav86]

http://uploads.tapatalk-cdn.com/20161229/77f67259b165793d94426e93ca94f3a7.jpg


Or using obd tool and this type of conection


Enviado desde mi iPhone utilizando Tapatalk

[cawadany]

On table via pinout you can read but not write.

[Babos]

On table via pinout you can read but not write.

Yes it is true i try before and read ok write NO!

[cawadany]

To write Immo must be Off

[RLine]

how is the best way for immo off without car

[cawadany]

Open ecu and bdm.

[icezero2010]

On table via pinout you can read but not write.


You can write After Immo off :)

[dadal]

immo is stored in eprom ?? if so eprom is extern ( separate) or in mcu ?? ( need to read over BDM)?

[morgano]

immo is stored in eprom ?? if so eprom is extern ( separate) or in mcu ?? ( need to read over BDM)?

Immo data and switch are stored in eeprom yes, and it is separare chip 95xxx family.

[dadal]

Thanks Morgano
I think that I found eprom
506157

[morgano]

You did.

Regards

[dadal]

Can I change mileage also in ECU or need dash? carprog has an option in the menu " change mileage"
I dont have ecu, I m collecting info about it
Thanks

[Vasily.U]

Carprog working with EDC16 ecu only with A1+ adapter.

[dadal]

Works only with A1+(A1 PLUS) new generation ODB2 adapter(the same as for S7.9 Volvo dash).
A1+(A1 PLUS) its not the same as A1 which is included in CarProg basics package.
If don't have A1+ (A1 PLUS) adapter, have to order it additionally.


your are right,,found it on carprog website,,
and how about clone device's ? we can also update it ( with A1+ cable )...or other option ?

[Vasily.U]

Try to order it additionally))) for chinese clone