PDA

View Full Version : Renault Megane III 1.5DCI Delphi DCM 3.4 Backup or Solution Needed



Tawe
4th January, 2017, 10:40 PM
Hi. I have problem with:
2011 Renault Megane 3 1.5DCI 90hp Delphi DCM 3.4 (Micro SH7059).


I've read it successfully with clone Ktag, but when I try to write it goes directly to 100%, stays there for about 20mins, and than shows "Error in writing".


I've also tried to write it with FGTech Galletto v54 clone, but still nothing - says - "Error Boot Mode", "Error Wake".


Some solution on somebody with full backup for this ecu:
237100914R
237101715R
28304871

amcharge
5th January, 2017, 12:05 AM
TRY KESS ON BOOT MOD AND WRITE ON RECOVERY OR WRITE. AT LOW SPEED

smirnoff_rules
5th January, 2017, 12:09 AM
thats normally because ignition isnt on right ? have you got in first gear with ignition on and over 12v

Tawe
5th January, 2017, 12:12 AM
TRY KESS ON BOOT MOD AND WRITE ON RECOVERY OR WRITE. AT LOW SPEED


thats normally because ignition isnt on right ? have you got in first gear with ignition on

I've both read and write Jtag Renesas (SH7059). Tried to write with Ktag and Galletto v54 - still nothing.

amcharge
5th January, 2017, 05:58 PM
Ibiza can doo this ecu obd kess

Tawe
18th January, 2017, 02:08 AM
Problem solved with NewTrasdata :)