View Full Version : Peugeot 206 S2000-25 immo off or clone
smirnoff_rules
6th January, 2017, 03:47 PM
l have a another garage asking me to replace a faulty ecu on peugoet 206 , if l get another secondhand ecu can l just swap eeproms
l read on another forum of member leaving eeprom out and car runs fine ?
cheers
Pyromaniak
6th January, 2017, 03:58 PM
work fine with replace eeprom
smirnoff_rules
6th January, 2017, 04:32 PM
looks like the guy will be lucky to find one in the uk
9637706380-03
s2000-25
9641815980
https://i.gyazo.com/a579f04d35b30903527bf0dd7b215c62.png
might be because its an auto ?
Pyromaniak
7th January, 2017, 01:01 AM
yes this is s2000 Ecu is filled with ruber compound (maybe silicon) here https://www.youtube.com/watch?v=0LIAVUFeY0U but keep you in mind its 3 types of these ecu. eeprom is locatet diferently
kronk92
7th January, 2017, 03:07 PM
and how you do to remove this ruber ? i saw some only cut the location where they will work on, and i have see another put the ecu in a liquid i think isopropyl alcohol
Pyromaniak
7th January, 2017, 03:38 PM
I carefully remove rubber in location where i will work on. This completely removing he making for delaborate (reverse engenering) or to repair it... Dont forget CAREFULY to pcb. This job is good razzor blade, cuting slowly and near by pcb with wood tool toothpig or something bambus (bamboo wood? ) sharpened end...
smirnoff_rules
7th January, 2017, 08:10 PM
would anyone know if there is a problem if l fitted same unit with all the same numbers and it came from a manual and this car is an automatic ? ie software map would be different ?
seller l found dosnt know if ecu is from manual or auto
Pyromaniak
7th January, 2017, 08:18 PM
You must try it, i think it?s ok, but if no, remove immo from new ecu(eeprom) and fit to new ecu. Or comlete reprogram with eprom and flash if anyway.
Zmann
8th January, 2017, 03:24 AM
Manual or Auto configuration is by one byte setting in the eep unless the sw package has been particularly made for a single transmission then the option is n/a on DiagBox. Usually cloning eep would also take the correct setting. But sw ID on the label could be outdated, if post both eep then they can be told.
smirnoff_rules
8th January, 2017, 01:55 PM
so the eeprom have the auto and manual info on it
Zmann
8th January, 2017, 02:23 PM
A sample of 206 S2000-2B configuration page on PP2000. There are two or three selectable options including 'Manual' on gearbox item.
419950
gkogkolos
27th March, 2017, 03:26 PM
Hello ppl,
I attach for anyone S2000-25 IMMO OFF file tested for years just in case you need to make the ecu immo offed.
You have to replace the eprom with a new one and write the file I attach in the new one.
That's all. No problems, no need codyfing, no errors, no nothing, start your engine and ride.
Press Reputation +1 = Password in PM
regards
pteter
14th June, 2018, 09:06 AM
Please password?
Tedum
14th June, 2018, 09:08 AM
Please password?
post yours i will make it off
pteter
15th June, 2018, 07:35 AM
Please Immo off
Tedum
16th June, 2018, 07:32 PM
her is your immo off file
emra elektronik
9th April, 2020, 10:18 AM
pass plaese
vagva
3rd June, 2020, 12:36 PM
Hello ppl,
I attach for anyone S2000-25 IMMO OFF file tested for years just in case you need to make the ecu immo offed.
You have to replace the eprom with a new one and write the file I attach in the new one.
That's all. No problems, no need codyfing, no errors, no nothing, start your engine and ride.
Press Reputation +1 = Password in PM
regards
pass please
rafal
3rd June, 2020, 03:39 PM
pass please
write this one..................
nikos10123
24th November, 2023, 06:27 AM
PASS PLASE THANKS
elektronik325
24th November, 2023, 06:04 PM
PASS PLASE THANKS
Post ori file from car
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.