Galletto ERRORE SET_ECU

[luis_sanchez_sanchez]

Hello,

A few days ago, I bought a galletto v1260 clone cable. After installing everything, I connected it to my car (Honda Accord i-ctdi 2007) and what I found was the following communication error ERRORE SET_ECU.

The ECU is an EDC16C31. I have been serching for information and I found some other people with the same problem, but no solunion at all.

I do not know where the problem is; ECU software, galletto cable or software, etc....

Does anybody have the solution or some clues about what it is happening?

Thanks in advance.

[worldiagnostic]

You should buy a normal ECU flashing tool :)

[gezame]

Hello,

A few days ago, I bought a galletto v1260 clone cable. After installing everything, I connected it to my car (Honda Accord i-ctdi 2007) and what I found was the following communication error ERRORE SET_ECU.

The ECU is an EDC16C31. I have been serching for information and I found some other people with the same problem, but no solunion at all.

I do not know where the problem is; ECU software, galletto cable or software, etc....

Does anybody have the solution or some clues about what it is happening?

Thanks in advance.

Hi,
Honda Accord ctdi 140cv, ist flaseable,
Honda Accord ctdi 150cv, ist not flaseable.
but last units produced, require programming by CAN-BUS, clone galletto only works with K-line , you need original and updated interface.
Regards.

[Tommy123Tommy]

What you say is not correct !!
You can flash some vehicles that can-bus with the galletto, just not though the obd port .






Hi,
Honda Accord ctdi 140cv, ist flaseable,
Honda Accord ctdi 150cv, ist not flaseable.
but last units produced, require programming by CAN-BUS, clone galletto only works with K-line , you need original and updated interface.
Regards.

[Tuning Runner]

What you say is not correct !!
You can flash some vehicles that can-bus with the galletto, just not though the obd port .


what you say is wrong.

Gezame is correct

[gezame]

what you say is wrong.

Gezame is correct

Hi,
Thanks.
Regards.

[Tommy123Tommy]

what you say is wrong.

Gezame is correct

and how do you work that out .

i come to my conclusion because i have flashed vehicle that use can bus with galletto!! but like i save not though obd port

[seed212]

and how do you work that out .

i come to my conclusion because i have flashed vehicle that use can bus with galletto!! but like i save not though obd port

PLEASE
HOW CAN I USE GALLETTO WITH CAN BUS ECU ?
THANKS

[worldiagnostic]

You must buy a normal ecu flash tool.

[seed212]

You must buy a normal ecu flash tool.

please where i can find it ? and is there name for this tool ?
thanks

[worldiagnostic]

Hm. I would say CMDFlash, Byteshooter, etc.