PASSAT B6 WONT START AFTER KEY LEARN

[gogoli]

need ad one key passat b6 2007 but dead
i need ad key with avdi by obd i have pin ,have cs
when i ad key get error security acess error
need help

thanks

[AndyCZ]

with original key car start or not?
Dashboard dead or live?
the dump before key learn and after, did you have it?

[Weasel3]

You had one key right before starting right?
If you have backup of the first reading before adding?
If so it should work just to write the old one back, to get everything working again.

Original tool or FVDI.
I think I remember they gave different CS I while back comparing to some other tools.
Maybe this is sorted out now.

Post your PIN /CS.
And someone will compare with Tang/TM.

You can also test to precode, and add with VCDS.

[paul_12345]

any problems with VAG cars always read/clear any fault codes in all modules.

[autochei]

Dump recognized: OK
Programmed keys: 2
PIN: 14472
CS: 6456F996C8ADF3
VIN: WVWZZZ3CZ6E114198
VAG#: 3C0959433K S0455/H038
Part#: HLO W42 07.10.05 P004 2565
IMMO: VWZCZ000000000
this it s cs which u read?

and more details how u read by obd first time

[lupu_sandu]

need ad one key passat b6 2007 but dead
i need ad key with avdi by obd i have pin ,have cs
when i ad key get error security acess error
need help
thanks
Put this in comfort:......

[AndyCZ]

I assume the problem is not in dump. There was no write back to CCM.

[autochei]

personal never add key by dump allwais by obd add with precoded chip

[gogoli]

by obd i need ad key but dont know what hopen
know cant conect with ccm i bridge fuse end in ccm not conect

[gogoli]

again for VW you are the best for me thanks lupu_sandu (http://www.digital-kaos.co.uk/forums/member.php/61191-lupu_sandu)

the car start ok with your file

[datapage]

Tm100+dump ori+ trans id48 virg= new file= ok
Error not work = dump ori bad or human error.

[gogoli]

i put dump form lupu sandu end car start

[autochei]

now send to lupu JB.

[Weasel3]

Put this in comfort:
:congrats:

[mikic]

I have the same problem. After learning second key to car,comunication with immo lost and immo forget all keys.Now immo not accept PIN (error 35 - invalid key). on adress 25-immo measurement block 003 have lock time 10. I wait one hour but nothing. Please help. Thanks 429062429063

[AndyCZ]

Did you learn the key by OBD or dump?

[mikic]

By OBD with vcds. Customer told me that he bought key from dealer. He lied me, key is blank.

[doctore]

Dump recognized
Programmed keys: 2
PIN: 41534
CS: D9 82 1F 7F B3 04 3E
VIN: WVWZZZ3CZ7E097364
IMMO: VWZCZ000000000
do you prepare the key before learning

[mikic]

No. I learn blank key

[doctore]

you must first prepare transponder with cs then learning
you have a problem because you did not do it :musicus:

try it restart the battery load original key with pin without new
find a colleague who has experience in this the helping you

[mikic]

I know. But car don't start with ori key. Lock time immo active and will not count down

[mikic]

Vcds doesn't see adapted key

[Weasel3]

The customer is to blame in this case.
A solution is to CS prepare the extra key, as a free service.
And send it to the dealer for adapt. At customers cost, or 50/50. Since he is to blame for this incident.

Or you could try to use Smok option, with another CCM fitted. And dump already read out. And write in your old info to it.
Or you wait for Lupu or another, which can come up with a solution. Editing your existing dump.

[topclef]

write back the edited dump and let us know the result...

[AndyCZ]

also this dump will start your car

[mikic]

I will try and report. Thanks

[mikic]

Car work. Thank you

[autochei]

where was the problem?

he try to program a blank transponder

ok but original key should be programing

why car no start with original key after?

if u have pin code u should be able to program ori.key but u say u have time waitting i know it s about 5 minuts and then u can program key again

[rokibar]

where was the problem?

he try to program a blank transponder

ok but original key should be programing

why car no start with original key after?

if u have pin code u should be able to program ori.key but u say u have time waitting i know it s about 5 minuts and then u can program key again
same questions in my head.

[autochei]

Car work. Thank you


what dump u use from who?

[mikic]

dump from AndyCZ and topclef is same

[mikajna]

I think chinese VCDS is blame for this eeprom mess...sorry if Im wrong

[named]

Hello, i've the same problem how gogoli (http://www.digital-kaos.co.uk/forums/member.php/69207-gogoli) and AndyCZ (http://www.digital-kaos.co.uk/forums/member.php/406007-AndyCZ) ... this is my dump 95320

3C0959433K

555233

Thank you :)

[AndyCZ]

Hello, i've the same problem how gogoli (http://www.digital-kaos.co.uk/forums/member.php/69207-gogoli) and AndyCZ (http://www.digital-kaos.co.uk/forums/member.php/406007-AndyCZ) ... this is my dump 95320

3C0959433K

Thank you :)

your dump is OK. what is your problem? Could you please describe better? What you did and what is the current status?

[named]

hi,

Engine Start Permited - No
Engine ECU Respons - Yes
Key Status - No
Number Of adapted Keys - 0

Immobilizer Status - 0

ESCL don't work and Car wont start

when i would like to add key get error security acess error
when i replace ELV i get the same error security access

my pin 02058

error 35 and error 22 in VCDS

do you help me?

[mikic]

What do you have on 25immo measurement block lock time

[named]

Lock Time Immobilizer - 0.0
Lock Time Engine - 0.0
Lock Time Transponder - 0.0
Immobilizer LED Status - 0.0

:(

old ESCL and new ESCL dont work

[Weasel3]

Did you try to write original dump back. And test if you had one working key to start with?
It should work.

Pin: 02058
VIN: Yes it is here.
CS: AB EC 22 B5 57 D8 45
MAC: AF D1 CB FB

If you prepare key manually, and do it by OBD instead.
It is important to lock the transponder before doing the programming via OBD.

[named]

yes, of course i tried write original dump and car still wont start.

in ccm dump - 2 active keys and immo status - 06

in stg25 - 0 active keys

ESCL dont work

when I put pin security acces in STG25 immo - error 35 and error 22 in VCDS

i've a question ... should be the same MAC in ECU and CCM ?

ESCL ELV - Status 0

help :)

[tomo776]

Hi
I have same problem.
Car was start ok problem was remote.
One of my friend try to learn remote with odis online and procedure fail.
After that car does not start any more.
I read pin code from engine ecu learn key car have ignition unitll i pull out key from ignition slot then again error key not detected on dash.
I try few times and i menage every time to learn key and get only ignition but engine dont start.
And every time if I pull out key from key slot car does not give ignition and error on dash key not detected.
Can lupu sandu or someone check my dumo from ccm and repair?

Thanx advance
Best regards

I sove this error.
If someone need help let me know.

[p1et]

Hello guys,

I also need to fix CCM dump, car don't start after customer tried to add spare key with FVDI by himself. Here is the dump from CCM:

Thanks in advance

[tomo776]

Here is it.
Write dump and start you car.
After in your topic you have pin and cs all you need that you can learn keys again with proper tool and all will work ok.

In attachment you have your dump and little handy tool if you have in the future this problem.

[Madol1]

Hello. Can you send me the password for the ccm tool?

[jokir]

Here is the developer page